Issued April 2013 • Index No. ED/3.0 Gas Engine-Driven Welder/AC Generator Industrial Applications Quick Specs Output Range Rated at 104˚ F (40˚ C) Maintenance Repair Farm/Ranch Applications Fabrication Use as a Stand-Alone Generator Stick (SMAW) DC TIG (GTAW) Air Plasma Cutting and Gouging with optional Spectrum models Generator Power Output Rated at 104˚ F (40˚ C) Peak: 6500 W, Continuous: 5500 W Accu-Rated™ Not Inflated – Generator Power Durable Subaru 14 HP engine provides a three-year engine warranty that ensures reliability and peace of mind for years after the purchase. Durable yet lightweight design provides maximum portability and a fully enclosed, affordable package. Tested and rated at 104 degrees Fahrenheit (40° C) to ensure consistent operation of the welder and generator in all climates. Very good DC Stick/TIG weld performance in a compact package. Fully enclosed case provides a fully protected engine to ensure long-term reliability. Convenient front panel ignition switch allows easy access to start and stop your welder/ generator with a standard recoil pull starter as backup. 12 hours of run time is provided by a seven-gallon fuel tank when using a typical 1/8-inch stick electrode. Reduces fuel consumption and noise by idling the engine down when no load is sensed. Accu-Rated™ 6500-watts of useable peak power cranks out enough power for most applications: jobsite, farm/ranch, or home. Maintenance is made easy with a standard backlit front panel gauge that shows engine hours and hours left before an oil change is due. Heavy-duty construction ensures protection from rough handling or the elements to keep you making money, rather than spending it. 120 V GFCI and 240 V receptacles provide power for jobsite tools. Receptacles are circuit breaker protected. Welder/generator is warranted for 3 years, parts and labor. Engine is warranted separately by the engine manufacturer. Equipment Sales US and Canada An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

(Subject to change without notice.) Amp/Volt Ranges Weld Output Rated at 104° F/40° C* Single-Phase Generator Power 200 A, 20% Duty Cycle 150 A, 100% Duty Cycle Welding Mode Peak: 6500 watts Continuous: 5500 watts 120/240 VAC, 54/27 A, 60 Hz Certified by Canadian Standards Association to both the Canadian and U.S. Standards. *Rated at sea level. **Net weight without fuel. Engine Specifications Engine Brand/ Warranty Subaru: 3-year mfg. (Engines warranted separately by the engine manufacturer.) Weld Speed One-cylinder, four-cycle overhead cam, industrial air-cooled, gasoline Idle Speed Fuel Capacity...

Genuine Miller Options ® Order the following from Miller Service Parts. GFCI Receptacles #300 584 Field Kit contains two GFCI 120 VAC duplex receptacles. (240 VAC GFCI receptacle not required). Electric Fuel Pump #300 567 Field For use at high altitudes. Improves engine starting and high-output performance. Female Receptacle Adapter Cord, Full KVA #300 517 Field NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120/240 V plug to common Millermatic® and Spectrum® 240 V plug. Full KVA Plug Kit #119 172 Field 120/240 VAC, 50-amp plug (NEMA 14-50P) to fit full KVA receptacle. Power Terminal Boots #186...

Typical Installations Stick Electrode Stick (SMAW) Basic Equipment Work TIG Torch TIG (GTAW) Basic Equipment • Steel and Stainless Steel Dynasty® 200 Series • Steel and Stainless Steel • Aluminum Dynasty Series MIG (GMAW) Basic Equipment Millermatic® 140 Auto-Set™ Millermatic® 180 Auto-Set™ Millermatic® 211 Auto-Set™ with MVP™ Disable the Auto-Set *power supplies. feature when using generator Spectrum Plasma Cutter Plasma Basic Equipment Spectrum® 375 X-TREME™ #907 529 See Lit. Index No. PC/9.2 Cutting Torch Work Leads Work Ordering Information Equipment and Options Subaru engine, with GFCI receptacles...