Catalogs >
Miller Electric Mfg. >
SuitCase® X-TREME? 8VS & 12VS

SuitCase® X-TREME? 8VS & 12VS
2Pages

Catalog excerpts

Quick Specs Input Power Industrial Applications Shipbuilding Construction Heavy Manufacturing Rental MIG (GMAW) Flux Cored (FCAW) Voltage-Sensing Wire Feeder 14 – 48 VDC Operating Voltage 110 VDC Maximum OCV Wire Feed Speed 50 – 780 IPM (1.3 – 19.8 m/min) Weight 8VS: 28 lb (13 kg) 12VS: 35 lb (15.9 kg) Smaller 8VS size for shipbuilding, maintenance or wherever a lighter, smaller, more portable feeder is required. Same great features of its big brother the X-TREME 12VS. Ergonomically sound, lightweight unit is well balanced for ease of carrying to remote welding sites. Fits through a 14 in (25 mm) manhole/manway. Trigger hold, wire jog, and gas purge are all located on front panel (8VS: Trigger Hold optional). Polypropylene case with built-in slide rails and the ability to open the door to change wire with feeder in vertical position. Wider voltage range for small and large wires with no contactor chatter or arc outages. Digital meters with SunVision™ technology can display voltage and wire speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight (8VS: Meters optional). Double-filtered gas valve helps keep dirt from clogging and affecting gas flow. Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation. Excellent starts and improved superior arc performance for all types and sizes of wires whether using CV or CC power supply. Improved contactor for high-amperage, high duty cycle applications (8VS: 330 A at 60%,12VS: 425 A at 60%). Specifications Model Input Power Operates on open-circuit voltage and arc voltage: 14 – 48 VDC/ 110 Max OCV (Use with CC/CV, DC Power Sources.) (Subject to change without notice.) Welding Power Input Welding Source Type Circuit Rating Wire Speed Electrode Wire Diameter Capacity Max. Spool Size Capacity CC or CV DC power sources. AC type not recommended. Solid Wire: .023– .062 in (0.6–1.6 mm) Flux Cored: .030– .062 in (0.8–1.6 mm) 330 A at 60% Duty Cycle 425 A at 60% Duty Cycle 50–780 IPM (1.3–19.8 m/min) dependent on arc voltage Solid Wire: .023– 5/64 in (0.6–2.0 mm) 12 in (305 mm) H: 15-1/2 in (394 mm) 35 lb Flux Cored: .030– 5/64 in (0.8–2.0 mm) Up to 45 lb W: 9 in (229 mm) (15.9 kg) (20 kg) D: 21 in (533 mm) Wire feeder is warranted for 3 years, parts and labor. Equipment Sales US and Canada An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1

Control Panels Drive Roll Kits (Order from Miller Service Parts.) Select drive roll kits from chart below according to type and wire size being used. Drive roll kits include 2 drive rolls, the necessary guides and feature an anti-wear inlet guide. 3 4 Wire size Wire Speed Control Jog/Purge Switch Voltmeter (Optional) Wire Speed/Amperage Meter (Optional) 5. Trigger Hold Switch (Optional) 6. Power Control Switch “V” groove for hard wire “U” groove for soft wire or soft-shelled cored wires “V” knurled for hard-shelled cored wires “U” cogged for extremely soft wire or soft- shelled cored wires...

Open the catalog to page 2