Catalogs >
Miller Electric Mfg. >
Millermatic 211

Millermatic 211
4Pages

Catalog excerpts

Quick Specs Light Industrial Applications MIG Power Source, Wire Feeder and Gun Package Light fabrication Maintenance and repair Auto body Farm/home Weld Thickness Input Power MIG (GMAW) Flux-cored (FCAW) 120 V: 24 ga.–3/16 in. steel 18 ga.–1/8 in. aluminum 240 V: 24 ga.–3/8 in. steel 18 ga.–3/8 in. aluminum Rated Output 120 V: 115 A at 19.8 VDC, 20% duty cycle 240 V: 150 A at 21.5 VDC, 40% duty cycle WEIGHS ONLY INPUT POWER NEW! Advanced Auto-Set ™ now includes five different wire/gas combinations and .024-inch (0.6 mm) wire capability. The easiest welder to use just became more versatile. • Wire/gas combinations include Flux Cored, Mild Steel with 100% CO2, Mild Steel with C25, Stainless Steel, and Aluminum with spool gun • Select the wire type and gas being used • Set the wire diameter, and select from .024, .030 and .035 diameters. A blue LED indicates that Auto-Set is activated • Dial in the thickness of what you’re welding • Start welding with the exact parameters you need! NEW! Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds. Multi-voltage plug (MVP) allows connection to common 120- and 240volt power receptacles without the use of any tools — simply choose the plug that fits the receptacle and connect to the power cord. NEW! Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns. NEW! Quick Select™ drive roll makes setup quicker by offering three grooves— two for different size solid wire and a third for flux-cored wire. Quick and easy setup Uses 4- or 8-inch (102 or 203 mm) spools and can be set up to weld with .024–.035 inch (0.6–0.9 mm) solid wire and .030–.045 inch (0.8–1.2 mm) flux-cored wire. NEW! Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch. NEW! Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine. NEW! Smooth-Start ™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category. Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools. Comes complete with: Power source 6.5 ft. (2 m) power cord with MVP plugs for 120 V and 240 V 10 ft. (3 m) M-100 MIG gun and cable assembly 10 ft. (3 m) work cable with clamp Flow gauge regulator and gas hose for argon and AR/CO2 mix Hobart® spool of .030 in. (0.8 mm) solid wire Two contact tips for .030 in. (0.8 mm) wire Quick Select ™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire Material thickness gauge 229895 Hook-and-loop cord wraps Note: Shielding gas and safety equipment not included. Welder is warranted for three years, parts and labor. Gun warranted for 90 days, parts and labor. Equipment Sales US and Canada MillerWelds.com An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA

Open the catalog to page 1

Operation Modes Auto-Set ™ mode Auto-Set eliminates guesswork and saves you time on setup. Turn wire selector knob to select the wire and gas combination being used. Turn wire speed control fully clockwise to select Auto-Set mode and set the wire diameter to either .024, .030 or .035 inch. The Auto-Set light indicates mode is activated. Then select material thickness using the Auto-Set control. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Auto-Set automatically sets your welder to the proper parameters. It’s available for welding with .024-, .030-...

Open the catalog to page 2

Genuine Miller Accessories ® Replacement/Optional MIG Gun M-100 (Standard) 248282 10 ft. (3 m) M-150 (Optional) 249040 12 ft. (3.7 m) 249041 15 ft. (4.5 m) All ship with liner 194011. Spoolmate™ 100 Spool Gun 300371 Direct-connect spool gun for all Millermatic 140, 141, 180, 190, 211 and Multimatic 200 models. Handles .030–.035 inch (0.8–0.9 mm) aluminum (4043 only) and .023–.035 inch (0.6–0.9 mm) steel/stainless steel wires. Rated at 135 amps, 30-percent duty cycle. Includes 12-foot (3.7 m) cable assembly and custom carrying case. Spoolmate™ 150 Spool Gun 301272 Direct-connect spool gun...

Open the catalog to page 3

Typical Installations MIG (GMAW) or Flux-Cored (FCAW) Basic Equipment Aluminum MIG (GMAW) Basic Equipment Ordering Information Power Source and Options Millermatic® 211 Millermatic® 211 with Running Gear/Cyl Rack 120/240 V, 60 Hz Power source packaged with 301239 running gear/cylinder rack 12 ft. (3.7 m). Includes custom carrying case Accessories Protective Cover Running Gear/Cylinder Rack Material Thickness Gauge Flux-Cored Wire Solid Wire Shielding Gas Cylinder Helmet/Gloves/Scratch Brush Available Through Miller Service Parts Flow Gauge Regulator for Argon or AR/CO2 Mix Flow Gauge...

Open the catalog to page 4