Catalogs >
Miller Electric Mfg. >
Millermatic® 211

Millermatic® 211
4Pages

Catalog excerpts

Issued April 2024 • Index No. DC/12.58 Quick Specs Light Industrial Applications Light fabrication Maintenance and repair Auto body Farm/home MIG Power Source, Wire Feeder and Gun Package Weld Thickness Input Power MIG (GMAW) Flux-cored (FCAW) 120 V: 24 ga.–3/16 in. steel 18 ga.–1/8 in. aluminum 240 V: 24 ga.–3/8 in. steel 18 ga.–3/8 in. aluminum Rated Output 120 V: 115 A at 19.8 VDC, 20% duty cycle 240 V: 150 A at 21.5 VDC, 40% duty cycle WEIGHS ONLY INPUT POWER Quick and easy setup Includes MDX™-100 MIG gun with AccuLock™ MDX consumable system featuring a dual-locked, front-loading liner that optimizes wire feedability. Advanced Auto-Set ™ includes five different wire/ gas combinations and three wire size capabilities. • Wire/gas combinations include Flux Cored, Mild Steel with 100% CO2, Mild Steel with C25, Stainless Steel, and Aluminum with spool gun • Select the wire type and gas being used • Set the wire diameter (.024, .030 or .035 in.). A blue LED indicates that Auto-Set is activated • Dial in the thickness of what you’re welding • Start welding with the exact parameters you need! Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds. Multi-voltage plug (MVP™) allows connection to common 120- and 240volt power receptacles without the use of any tools — simply choose the plug that fits the receptacle and connect to the power cord. Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup. Quick Select™ drive roll makes setup quicker by offering three grooves— two for different size solid wire and a third for flux-cored wire. ™ Auto Spool Gun Detect automatically detects when a MIG gun or spool gun is connected, eliminating the need for a switch. Fan-On-Demand™ cooling system only operates when needed, reducing noise, energy use and contaminants pulled though the machine. Smooth-Start ™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category. Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools. Uses 4- or 8-inch (102 or 203 mm) spools and can be set up to weld with .024–.035 inch (0.6–0.9 mm) solid wire and .030–.045 inch (0.8–1.2 mm) flux-cored wire. Comes complete with: Power source 10 ft. (3 m) MDX™-100 MIG gun 10 ft. (3 m) work cable with clamp 6.5 ft. (2 m) power cord with MVP™ plugs for 120 V and 240 V Flow gauge regulator and gas hose for argon or AR/CO2 mix Hobart® spool of .030 in. (0.8 mm) solid wire Two contact tips for .030 in. (0.8 mm) wire Quick Select ™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire Material thickness gauge 229895 Hook-and-loop cord wraps Note: Shielding gas and safety equipment not included. Welder is warrantied for three years, parts and labor. Gun warrantied for 90 days, parts only. Equipment Sales US and Canada An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 92

Open the catalog to page 1

Operation Modes Auto-Set ™ mode Auto-Set eliminates guesswork and saves you time on setup. Turn wire selector knob to select the wire and gas combination being used. Turn wire speed control fully clockwise to select Auto-Set mode and set the wire diameter to either .024, .030 or .035 inch. The Auto-Set light indicates mode is activated. Then select material thickness using the Auto-Set control. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Auto-Set automatically sets your welder to the proper parameters. It’s available for welding with .024-, .030-...

Open the catalog to page 2

Genuine Miller Accessories ® MDX™-100 MIG Gun 1770028 100-amp MIG gun with Miller® AccuLock™ MDX consumables for .030–.035 in. (0.8–0.9 mm) wire. Includes 10 ft. (3 m) cable assembly. • Install AccuLock contact tips with a single turn. • AccuLock liner locks at front and back of gun to align with contact tip and power pin for a flawless wire feed path. • Durable, ergonomic handle with overmolding improves grip and comfort. • Ball-and-socket handle with rear swivel for increased gun maneuverability while reducing welder fatigue. Spoolmate™ 100 Spool Gun 300371 Direct-connect spool gun...

Open the catalog to page 3

Ordering Information Power Source and Options Millermatic 211 Millermatic® 211 with Running Gear/Cyl Rack 120/240 V, 50/60 Hz Power source packaged with 301239 running gear/cylinder rack 12 ft. (3.7 m). Includes custom carrying case Accessories Running Gear/Cylinder Rack Dual Cylinder Rack Conversion Kit and Tool Holder Dual Cylinder Rack Cart Protective Cover Includes running gear/cylinder rack 301239 and dual cylinder rack conversion kit 301454. Must be assembled together Material Thickness Gauge Flow Gauge Regulator for Argon or AR/CO2 Mix Replacement standard regulator Flow Gauge...

Open the catalog to page 4