Catalogs >
Miller Electric Mfg. >
Millermatic®211 Auto-Set with MVP

Millermatic®211 Auto-Set with MVP
4Pages

Catalog excerpts

Millermatic 211 ® Light Industrial Applications Quick Specs Processes Light Fabrication Maintenance and Repair Garage/Body Shop Farm/Home Auto-Set with MVP MIG (GMAW) Flux Cored (FCAW) ™ MIG Arc Welding Power Source, Wire Feeder and Gun Package Rated Output Input Power 230 V, 25 A, 60 Hz, Single-Phase 120 V, 20 A, 60 Hz, Single-Phase The Power of Blue . Issued September 2010 • Index No. DC/12.54 ™ 150 A at 23.5 VDC, 30% Duty Cycle (230 V) 90 A at 20 VDC, 20% Duty Cycle (120 V) Amperage Range 30 –210 A Max. Open-Circuit Voltage 34 ® Auto-Set™: The right steel settings automatically. • Set the wire diameter, a blue light shows that Auto-Set ™ is activated • Dial in the thickness of what you’re welding • Start welding with the exact parameters you need! Infinite voltage control gives you the flexibility to manually set the machine when welding aluminum, stainless steel, or anytime you want to set your own parameters on mild steel. Welds thickest material in its class! The Millermatic® 211 Auto-Set™ with MVP™ has the highest output in its class. It can weld from 24 ga – 3/8 in (0.8 – 9.5 mm) mild steel in a single pass on 230 V. Comes Complete With: Power source 6 ft (1.8 m) power cord and MVP™ plugs 10 ft (3 m) M-100 MIG gun and cable assembly 10 ft (3 m) work cable and clamp Smith® Argon and AR/CO2 mix regulator/flow gauge with hose Spool of Hobart® .030 in (0.8 mm) solid wire Two contact tips for .030 in (0.8 mm) wire and two contact tips for .035 in (0.9 mm) wire Dual-groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire Factory-installed gas solenoid valve Set-up and operation CD Information/settings chart Material thickness gauge ➤ #229 895 Note: Shielding gas and safety equipment not included. Spool gun ready out of the box! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-Set™ with MVP™, the Spoolmate™ 100 Series spool gun allows you to weld from 18 ga – 3/8 in aluminum. Miller’s “Tip Saver” short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than unit. Smooth-Start ™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category. No pop gun starts and virtually no spatter to clean up. Cable management built into the handle. Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools. Miller’s multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—simply choose the plug that fits the receptacle and connect it to the power cord. Durable cast-aluminum drive system incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster. Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024–.035 in (0.6–0.9 mm) mild/stainless steel and .030–.045 in (0.8–1.2 mm) flux cored. Welder is warranted for 3 years, parts and labor. Original main power rectified parts are warranted for 5 years. Gun warranted for 90 days, parts and labor. Miller Electric Mfg. Co. Equipment Sales US and Canada Web Site An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125 www.MillerWelds.com

Open the catalog to page 1

Specifications (Subject to change without notice.) @J's Certified by Canadian Standards Association to both the Canadian and U.S. Standards. Control Panel 1. Trigger Lead Switch Connection 2. Wire Feed Speed Control/Wire Diameter 4. Voltage Control/Material Thickness 6. Over Temperature Light Performance Data 8. Plastic Hub with Retaining Ring for 8 in Spools (shaft also accepts 4 in spools) 9. Storage Holes for Spare Tips 10. Polarity Changeover Terminals 11. Calibrated Tension Knob 13. T-Knob (secures torch) 14. Dual-Groove Quick-Change Drive Roll % DUTY CYCLE % DUTY CYCLE

Open the catalog to page 2

Genuine Miller Accessories Small Running Gear/Cylinder Rack #300 425 Durable construction. For gas cylinders no larger than 7 in (178 mm) diameter, maximum weight 75 lb (34 kg). Millermatic Protective Cover #195 149 Spoolmate™ 100 Series Spool Gun #300 371 Direct connect spool gun for all Millermatic 140, 180, 211 and Passport Plus models. Handles .030 –.035 in (0.8 – 0.9 mm) aluminum and .023 –.035 in (0.6 – 0.9 mm) steel/stainless steel wires. Rated at 135 amps, 30% duty cycle. Includes 12 ft (3.7 m) cable assembly and custom carrying case. Running Gear/ Cylinder Rack #770 187 Heavy-duty...

Open the catalog to page 3