Catalogs >
Miller Electric Mfg. >
Millermatic® 141 MIG Welder

Millermatic® 141 MIG Welder
4Pages

Catalog excerpts

MIG Power Source, Wire Feeder and Gun Package Light Industrial Applications Quick Specs Weld Thickness Light fabrication Maintenance and repair Auto body Farm/home MIG (GMAW) Flux-cored (FCAW) Input Power 120 V, 20 A, 60 Hz, single-phase Rated Output 90 A at 18.5 VDC, 20% duty cycle 40 A at 16 VDC, 100% duty cycle, CSA VOLT INPUT POWER Uses common household power Weld capacity Quick and easy setup Auto-Set ™ automatically provides the right settings to weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters. • Set the wire diameter, a blue light shows Auto-Set is activated • Dial in the thickness of what you’re welding • Start welding with the exact parameters you need! Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns. ™ Quick Select drive roll makes setup quicker by offering three grooves — two for different size solid wire and a third for flux-cored wire. Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch. Smooth-Start ™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category. Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools. Uses 4- or 8-inch (102 or 203 mm) spools and can be set up to weld with .024–.030 inch (0.6–0.8 mm) solid wire and .030–.035 inch (0.8–0.9 mm) flux-cored wire. Comes complete with: Power source 6.5 ft. (2 m) power cord with plug 10 ft. (3 m), M-100 MIG gun and cable assembly 10 ft. (3 m) work cable with clamp Argon and AR/CO2 mix flow gauge regulator with gas hose Hobart® spool of .030 in. (0.8 mm) solid wire Two contact tips for .030 in. (0.8 mm) wire Quick Select ™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire Material thickness gauge ➤ 229895 Hook-and-loop cord wraps Note: Shielding gas and safety equipment not included. Welder is warranted for three years, parts and labor. Original main power rectifier parts are warranted for five years. Gun warranted for 90 days, parts only. Equipment Sales US and Canada MillerWelds.com An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-7

Open the catalog to page 1

Operation Modes Auto-Set ™ Mode Auto-Set eliminates guesswork and saves you time on setup. Turn wire speed control fully clockwise to select Auto-Set mode, and set the wire diameter to either .024 or .030 in. The Auto-Set light indicates mode is activated. Then select material thickness using the Auto-Set control. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Auto-Set automatically sets your welder to the proper parameters. It’s available for welding 24-gauge through 3/16-inch mild steel, and only works with .024 and .030 solid wires and C25 shielding...

Open the catalog to page 2

Genuine Miller Accessories ® Spoolmate™ 100 Spool Gun 300371 Direct-connect spool gun for all Millermatic 140, 141, 180, 190, 211 and Multimatic 200 models. Handles .030–.035 inch (0.8–0.9 mm) aluminum (4043 only) and .023–.035 inch (0.6–0.9 mm) steel/stainless steel wires. Rated at 135 amps, 30-percent duty cycle. Includes 12-foot (3.7 m) cable assembly and custom carrying case. Replacement/Optional MIG Gun M-100 (Standard) 248282 10 ft. (3 m) M-150 (Optional) 249040 12 ft. (3.7 m) 249041 15 ft. (4.5 m) All ship with liner 194011. Running Gear/ Cylinder Rack 301239 Heavy-duty construction...

Open the catalog to page 3