Catalogs >
Miller Electric Mfg. >
Millermatic® 125 Hobby

Millermatic® 125 Hobby
4Pages

Catalog excerpts

MIG Power Source, Wire Feeder and Gun Pkg Light Industrial Applications Quick Specs Input Power Light fabrication Farm/home MIG (GMAW) Flux-cored (FCAW) Rated Output Weld Thickness VOLT INPUT POWER Uses common household power Weld capacity Quick and easy setup Auto-Set ™ automatically provides the right settings to weld mild steel while tapped voltage control allows the flexibility to manually set your own parameters. • Turn the Wire Speed knob to Auto-Set, a blue light shows Auto-Set is activated • Dial in the thickness of what you’re welding • Start welding with the exact parameters you need! Quick Select™ drive roll makes setup quicker by offering three grooves — two for different size solid wires and a third for flux-cored wire. Cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup. Factory-installed gas solenoid makes it easy to switch between MIG welding and flux-cored wire. Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools. Uses 4- or 8-inch (102 or 203 mm) spools and can be set up to weld with .024 –.030 inch (0.6 – 0.8 mm) solid wire and .030 –.035 inch (0.8 – 0.9 mm) flux-cored wire. Comes complete with: Power source Power cord with plug 8 ft. (2.4 m) M-80 MIG gun and cable assembly 8 ft. (2.4 m) work cable with clamp Argon and AR/CO2 mix flow gauge regulator with gas hose Hobart® spool of .030 in. (0.8 mm) solid wire Two contact tips for .030 in. (0.8 mm) wire Quick Select ™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire Material thickness gauge Note: Shielding gas and safety equipment not included. Welder is warranted for three years, parts and labor. Original main power rectifier parts are warranted for five years. Gun warranted for 90 days, parts only. Equipment Sales US and Canada An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX

Open the catalog to page 1

Operation Modes Auto-Set ™ Mode Auto-Set eliminates guesswork and saves you time on setup. When using .030-inch wire, turn Wire Speed control fully counter clockwise to select Auto-Set mode. The Auto-Set light indicates mode is activated. Then select material thickness using the Voltage/Material Thickness control. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Auto-Set automatically sets your welder to the proper parameters. It’s available for welding 22-gauge through 12-gauge mild steel, and works with .030 solid wire and C25 shielding gas (75% argon,...

Open the catalog to page 2

Duty Cycle Chart Volt/Amp Curves Welding Amperes Performance Data Duty Cycle % Genuine Miller Accessories ® Millermatic Protective Cover #301 333 Running Gear/ Cylinder Rack #301 239 Heavy-duty construction with 8-inch rubber rear wheels. Convenient front handles, cable holders and plastic consumable box. For gas cylinders no greater than 7 inches (178 mm) in diameter or 65 pounds (29.5 kg) in weight. Consumables for M-80 Gun (Order from Miller Service Parts.) Contact Tips #087 299 .024 in. (0.6 mm) #000 067 .030 in. (0.8 mm) #000 068 .035 in. (0.9 mm) Gasless Flux-Cored Nozzle #226 190 For...

Open the catalog to page 3