Catalogs >
Miller Electric Mfg. >
Maxstar® 161 Series T

Maxstar® 161 Series T
8Pages

Catalog excerpts

Industrial Applications Quick Specs Metal fabrication Maintenance and repair Farm/home Light industrial MIG (GMAW) Flux-cored (FCAW) Input Power 200(208)/230 V, single-phase, 60 Hz MIG Power Source, Wire Feeder and Gun Package Amperage Range 30–210 A Rated Output 160 A at 24.5 VDC, 60% duty cycle Wire Feed Speed 50–700 ipm (1.3–17.8 m/min.) Max. Open-Circuit Voltage 34.5 V Net Weight 178 lb. (81 kg) Auto-Set ™ makes setup quick and easy and works with .030- and .035-inch wire. See page 2 for more information. Comes complete with: 15 ft. (4.6 m), 250-amp MDX™-250 MIG gun 10 ft. (3 m) work cable with clamp 7 ft. (2.1 m) power cord with plug Flow gauge regulator and gas hose for argon or AR/CO2 mix Factory-installed lowered running gear/cylinder rack .030/.035 in. reversible dual-groove drive rolls Extra contact tips Material thickness gauge (229895) ‰ Infinite voltage control. When used in manual mode provides broader operating range with finer control than a tap machine. Line voltage compensation keeps power constant even if power input varies by ±10 percent. No more replacing mechanical output contactors. Our built-in solid-state contactor circuit makes wire electrically “cold” until trigger is pulled, and gives you life-long welding output and performance. ™ Gun-On-Demand. Simply pull the trigger for either gun and you’re ready to weld. No wasted time installing modules and using gas valve kits. EZ-Access™ consumable compartment and parameter chart. Set weld parameters right the first time with convenient flip-down compartment that provides fast access to parameter chart and consumables. See page 3 for more information. Heavy-duty aluminum two-drive-roll system. Fan-On-Demand™ cooling system only operates when needed, reducing noise, energy use and the amount of contaminants pulled though the machine. Compatible with Bobcat™ welder/generators. IMPROVED! Now with NEW! MDX Series MIG gun. Aluminum MIG welding with optional Spoolmate™ 200 spool gun. Wire feed speed control on the gun saves time by reducing trips back to the machine. Also compatible with more industrial Spoolmatic® spool guns. Welder is warranted for three years, parts and labor. Original main power rectifier parts are warranted for five years. Gun warranted for 90 days, parts and labor. Equipment Sales US and Canada An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FA

Open the catalog to page 1

Auto-Set™ eliminates guesswork and saves you time on setup. Use Auto-Set when you want the speed, convenience and confidence of preset controls. Simply set the wire diameter, set the material thickness, and go! Auto-Set automatically sets your welder to the proper parameters. It’s available when welding mild steel with .030 or .035 solid wires and C25 shielding gas (75 percent argon, 25 percent CO2). You can also set the weld parameters manually. Simply refer to the flip-down parameter chart, and set the voltage and wire feed speed to the recommended settings for your application. 0...

Open the catalog to page 2

Standard Fully Loaded Features EZ-Change™ low cylinder rack Operators no longer need to lift cylinders. Cylinders now easily roll on and off our EZ-Change™ low cylinder rack. Angled wire drive Angled industrial aluminum dual-gear drive system significantly improves wire feeding and runs large spools of wire. Allows quick change of drive rolls without tools. Drive roll storage — no more lost drive rolls, extra drive rolls are conveniently stored next to drive motor. Operators no longer bump into and bend MIG gun and gun liner. Dual front handles Split handle with rubber grips designed to...

Open the catalog to page 3

Dual EZ-Change™ low cylinder rack with elevated gun and cable rack 300337 ■ Dual cylinder rack allows for easy storage of two cylinders. ■ EZ-Change™ low cylinder rack eliminates the need to lift cylinders on and off cylinder rack. ■ No more running over spool gun cables or cables dragging on the floor. ■ Tangle-free, independent way to store spool gun cables, keeping them off of the floor.

Open the catalog to page 4

Dual EZ-Change™ Low Cylinder Rack with Elevated Gun and Cable Rack 300337 Dual cylinder rack allows operators to easily roll cylinders on and off the rack with no lifting. Gun and cable rack keeps cables off the floor and tangle free. Elevated Gun and Cable Rack 300335 For use with single cylinder rack. (Included with dual EZ-Change low cylinder rack.) Protective Cover 195142 Features side pocket. (Not for use with dual cylinder rack or elevated gun and cable rack.) Argon/Mixed Gas Regulator and Gas Hose 195050 \ Female Receptacle Full KVA Adapter Cord 300517 Field NEMA 14-50P to NEMA...

Open the catalog to page 5

For Spoolmate™ 200 Spool Gun For Millermatic® 212 Auto-Set™ Note: Miller®FasTip™, M-Series and Bernard Centerfire™ diffusers and consumables are NOT compatible with MDX Series guns. Standard Miller® AccuLock™ MDX Consumables Smaller consumables and components to access hard-to-reach weldments. Contact Tips (10 per package) T-M023 .023 in. (0.6 mm) Nozzles N-M1200C Copper, 1/2 in. ID, flush, standard N-M1218C Copper, 1/2 in. ID, 1/8 in. recess N-M5800C Copper, 5/8 in. ID, flush N-M5818C Copper, 5/8 in. ID, 1/8 in. recess N-M58XTC Copper, 5/8 in. ID, 1/8 in. stickout Diffuser...

Open the catalog to page 6