Catalogs >
Miller Electric Mfg. >
Maxstar 150 STL

Maxstar 150 STL
4Pages

Catalog excerpts

Light Industrial Applications Quick Specs Process Pipe Dairy Industry Food/Beverage Industry Restaurant/Kitchen Repair Experimental Aircraft Shipboard Installation/Repair Maintenance Repair TIG/Stick Welding Power Source Lift-Arc™ TIG (GTAW) Stick (SMAW) Input Power Single-Phase Power Amperage Range 115 VAC: 5 – 150 A (DC TIG) 20 – 100 A (DC Stick) 230 VAC: 5 – 150 A (DC TIG) 20 – 150 A (DC Stick) Max. Open-Circuit Voltage 90 Net Weight 13.7 lb. (6.2 kg) Single amperage range allows operator to accurately set amperage on both 115 or 230-volt primary power. Allows for any input voltage hookup (115–230 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Inverter-based, DC power source has a simple-to-use operator interface providing only the necessary controls in a compact machine. Hot Start™ adaptive control provides positive arc starts without sticking. Best-in-class Stick arc characteristics for those demanding jobs. Multi-Voltage Plug (MVP™) allows for connection to 115 or 230-volt receptacles without tools by choosing the plug that fits the receptacle and connecting it to the power cord. Low OCV Stick is a simple design that reduces the open-circuit voltage to 12–16 volts when the welding power source is not in use. This circuit design is now built into the Maxstar 150 STL eliminating the need for add-on voltage reducers. Portable in the shop or at the job site — at 13.7 pounds, the shoulder strap allows the end user to easily move from location to location. Lift-Arc™ start provides TIG arc initiation without the use of high frequency. Full function remote control for precise amperage control for critical welds on thin materials (6-pin fingertip or foot control available.) Thermal overload protection with indicator light helps prevent machine damage if the duty cycle is exceeded or airflow is blocked. TIG/Stick Package (#907 135 017) comes complete with: Maxstar 150 STL power source 10-ft. (3 m) MVP™ power cord MVP™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) X-CASE™ provides protection in transport and storage Remote fingertip control Weldcraft® A-150 (WP-17) 12.5-ft (3.8 m) TIG torch with connector Stick electrode holder with 13-ft. (4 m) cable and 25-mm Dinse connector Work clamp with 10-ft. (3 m) cable and 25-mm Dinse connector Miller | Smith flow gauge regulator with gas hose AK2C accessory kit Shoulder strap Power Factor Corrected (PFC) for optimum performance especially on 115 volt — reduces nuisance breaker tripping. Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine. Built-in gas solenoid eliminates the need for bulky torch with a gas valve. Power source is warranted for 3 years, parts and labor. Original main power rectified parts are warranted for 5 years. Equipment Sales US and Canada An ITW Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1

Specifications (Subject to change without notice.) Rated Welding Output Amps Input at Rated Output, 50/60 Hz Input Power Welding Amperage Range Welding Mode Certified by Canadian Standards Association to both Canadian and U.S. Standards. *Sense voltage for Stick and Lift-Arc TIG. Amperage Adjustment Control Remote TIG Selector Light TIG Selector Light Stick Selector Light Process Selector Touch Pad Positive Weld Output Receptacle Ready Light Overtemperature Light Negative Weld Output Receptacle with Flow Thru Performance Data VOLT/AMP CURVES DUTY CYCLE CHART 100 80 OUTPUT AMPERES % DUTY CYCLE

Open the catalog to page 2

Standard Package #907 135 Package includes: Maxstar 150 STL power source 10-ft. (3 m) MVP™ power cord MVP™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) Stick electrode holder with 13-ft. (4 m) cable and 25-mm Dinse connector Work clamp with 10-ft. (3 m) cable and 25-mm Dinse connector One air-cooled TIG torch connector (#195 234) Shoulder strap TIG/Stick Package #907 135 016 TIG/Stick Package with Remote Fingertip Control #907 135 017 Packages include: Maxstar 150 STL power source 10-ft. (3 m) MVP™ power cord MVP™ plugs 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) X-CASE™ — provides...

Open the catalog to page 3