TIG/Stick Welding Power Source Quick Specs Industrial Applications Precision fabrication Heavy fabrication Pipe and tube fabrication Aerospace Aluminum ship repair Anodized aluminum fabrication Processes AC/DC TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Input Power 120-480 V, 1-phase or 3-phase power Amperage Range 1-210 A (DC) 2-210 A (AC) Rated Output 210 A at 18 V, 60% duty cycle Net Weight 47 lb. (21.3 kg) Update and expand. Front panel memory card data port provides the ability to easily update software and expand product features. See memory cards on page 7. Visit MiHerWelds. com/TIGSoftware for the latest software updates and expansions. Pro-Set™ eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. Simply select the feature and adjust until Pro-Set appears on the display. specified time. Allows for any input voltage hookup (120-480 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Meter calibration allows digital meters to be calibrated for certification. Cooler Power Supply (CPS) is an integrated 120-volt dedicated-use receptacle for the Coolmate™ 1.3. Available on select models, see page 6. Cooler-On-Demand™ feature operates the auxiliary cooling system only when needed, reducing noise, energy use, and airborne contaminants pulled through the cooler. Note: Cooler-On-Demand is only available on CPS models. Wind Tunnel Technology™ protects internal electrical components from airborne contaminates, extending the product life. Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine. Blue Lightning™ high-frequency (HF) arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Power source is warranted for three years, parts and labor. AC TIG Features Balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. DX models provide extended ranges. Frequency controls the width of the arc cone and can improve directional control of the arc. AC Waveforms Advanced squarewave, fast freezing puddle, deep penetration and fast travel speeds. Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Sine wave for customers that like a traditional arc. Quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds. DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. AC/DC Stick Features DIG control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010. Hot Start™ adaptive control provides positive arc starts without sticking. AC frequency control adds stability for smoother welds when AC Stick welding. Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable. Millet Electric Mfg. Co. An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Equipment Sales US and Canada Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Specifications (Subject to change without notice.) Welding Mode Stick (SMAW) • Efficient fin and tube heat exchanger • Factory-set pressure relief valve (55 psi) maintains consistent pressure during operation • Filter and coolant filling spout are conveniently located • Brass-body, positive displacement rotary vane pump provides consistent coolant flow and pressure rating with long pump-life expectancy Input Power Dynasty® models with CPS turn Coolmate 1.3 on and off • Power indicator light • Fluid level sight window • Rustproof polyethylene-molded coolant tank and filler spout • 1/4 hp motor...

Cooling Method

1. Standby Switch 2. Voltmeter Display 3. Ammeter Display 4. Output Contactor “On” Indicator 5. AC TIG Process Menu Parameters Amperage 2-210 A** 6. AC Stick Process Menu Parameters Amperage 5-210 A 7. Memory Card Port 12. DC Stick Process Menu Parameters Amperage 5-210 A 13. Process Selector *Pro-Set parameter selectable. **Amperage range is tungsten size dependent. Tech Menu (Hold Menu button five seconds.) AC TIG 1. Start = HF/Lift Arc 2. Tungsten Size = .020-1/8 in. or .05-3.2 mm 3. Remote Trigger = STD/HOLD/OUTPUT ON AC Stick 1. Hot Start = ON/OFF 2. Remote Trigger = OUTPUT ON/STD DC...

Dynasty 210 DX Control Panel ® 1. Standby Switch 2. Voltmeter Display 3. Ammeter Display 4. Polarity 5. Process/ Arc Starting 6. Output Control AC/DC TIG: HF impulse, Lift-Arc Stick: Adaptive Hot Start Standard remote, 2T trigger hold, Output on 7. Pulser Control Pulses per Second* DC : 0.1– 500 PPS AC : 0.1– 500 PPS Peak Time* 5 – 95% Background Amps* 5 – 95% 8. Memory Card Port 9. Activity Indicator 10. Encoder Control 11. Amperage Button TIG AC 2–210 A** TIG DC 1–210 A** Stick 5–210 A 12. AC Waveshape Balance* Ball (30%), 50–99% EN Frequency* 20–400 Hz 13. Gas/DIG Preflow 0.0–25.0 seconds...

Build an Air-Cooled Package Select desired stock number for each step. Preconfigured Water-Cooled Packages Use a single stock number to order a complete preconfigured system. Select Water-Cooled Complete Package Dynasty 210 (CPS) Complete with Foot Control 951666 Dynasty 210 (CPS) Complete with Wireless Foot Control 951667 Dynasty 210 DX (CPS) Complete with Foot Control 951668 Dynasty 210 DX (CPS) Complete with Wireless Foot Control 951669 Comes with: ♦ 8 ft. power cord (no plug) ♦ Quick reference guide ♦ Coolmate™ 1.3 300972 ♦ Coolant (4 one-gallon bottles of 043810) ♦ Small Runner™...