Catalogs >
Miller Electric Mfg. >
CST™ 280 208-230/400-460 V, Dinse

CST™ 280 208-230/400-460 V, Dinse
4Pages

Catalog excerpts

Stick/TIG Welding Power Source Quick Specs Industrial Applications Power plant construction Petrochemical construction Maintenance and repair Shipbuilding Processes Stick (SMAW) TIG (GTAW) Lift-Arc Input Power Requires 3- or 1-phase power Amperage Range TIG: 5-280 A, stick: 30-280 A Max. Open-Circuit Voltage 77 VDC Net Weight 41 lb. (18.6 kg) Superior stick arc performance even on the difficult-to-run electrodes like E6010. Adaptive Hot Start™ for stick arc starts automatically increases the output amperage at the start of a weld should the start require it. Prevents the electrode from sticking. Lift-Arc™ start provides TIG arc starting without the use of high frequency. Simple voltage-changeover switch saves time when changing primary voltage. Input voltage can be changed without removal from inverter rack or removal of machine case. CST 280 with Meter fff^/Optional digital meter for more precise control when presetting or monitoring welding amperage. Portable in the shop or at the jobsite—at 41 pounds the CST 280 is easily moved from location to location. Remote amperage control provided through 14-pin receptacle on front of the machine. This permits use of standard remote amperage control devices. Fan-On-Demand™ cooling system operates only when needed, providing power efficiency and noise reduction. Six-foot power cable included. Rack mountable for protection, storage and transportation of multiple power sources while using a single primary power cable. Power source is warranted for three years, parts and labor. Original main power rectified parts are warranted for five years. Miller Electric Mfg. Co. An ITW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Equipment Sales US and Canada Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1

Specifications (Subject to change without notice.) dES HU * Output ratings on 230 V single-phase are reduced to comply with CSA current limitation on input power cable. Certified by Canadian Standards Association to both the Canadian and U.S. Standards. 1P23M approval. 3. Weld Process Selector Switch 5. Digital Meter Display Duty Cycle Chart Volt/Amp Curve At 150 Amps

Open the catalog to page 2

TIG (GTAW) Torches Remote Controls Weldcraft™ TIG Torches The Weldcraft line of air-cooled and water-cooled TIG torches complements the most popular TIG power source line available today. A-150 Valve #WP-17V-12-2 12 ft. (3.7 m) #WP-17V-25-2 25 ft. (7.6 m) 150-amp air-cooled torch with valve and two-piece cable. A-200 Valve #WP-26V-12-2 12 ft. (3.7 m) #WP-26V-25-2 25 ft. (7.6 m) 200-amp air-cooled torch with valve and two-piece cable. These two-piece-cable TIG torches require the installation of a Dinse-style connector (#042 418) or Tweco-style connector (#191981) depending on the CST...

Open the catalog to page 3

Shown with optional running gear. ■ The rack provides a simple means of protecting and transporting welding power sources for construction, power plant turn-arounds and shipbuilding applications. ■ The CST" 280 Rack’s low weight (340 pounds fully loaded) enables use of elevators to move rack. Top cover to protect the machines from falling debris. ■ Meets NEC requirements with appropriate fuses. CST Rack Specifications ■ Lift truck side and end fork pockets. ■ Lifting eye simplifies transportation using crane or overhead lifting device. ■ One main disconnect box with fused circuit...

Open the catalog to page 4