Catalogs >
Miller Electric Mfg. >
Bobcat? 250 Diesel

Bobcat? 250 Diesel
8Pages

Catalog excerpts

Industrial Applications Quick Specs Maintenance Repair Farm/Ranch Applications Fabrication Structural Steel Work Use as a Stand-Alone Generator Stick (SMAW) Flux-Cored (FCAW) MIG (GMAW) DC TIG (GTAW) Non-Critical AC TIG (GTAW) Air Carbon Arc (CAC-A) Cutting and Gouging (3/16-in. carbons) Air Plasma Cutting and Gouging with optional Spectrum models Diesel Engine-Driven Welder/AC Generator Output Range AC Stick/TIG 40 – 250 A DC Stick/TIG* 40 – 275 A FCAW/MIG 17 – 28 V *DC TIG available above 80 amps. Generator Power Output Rated at 104˚ F (40˚ C) Peak: 11,000 W, Continuous: 9,500 W Accu-Rated™ Not Inflated – Generator Power Reliable Bobcat engine-driven welding generators are the industry standard for quality and value. Multiprocess weld output, strong generator power, and most important — rated #1 in reliability, make the Bobcat the welding industry’s most popular choice. Bulletproof inside and out. Accu-Rated™ — Not Inflated Generator Power. Miller’s Accu-Rated 11,000 watts of usable peak power is delivered for a minimum of 30 seconds. See page 3 for more information. Smooth power — not spike power. Revolutionary ten-degree skewed-rotor design optimizes generator performance for smoother power — not spiked power found with other brands. Better power — better performance. Smaller and lighter design. Bobcat * welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easier to move safely around jobsites — even with weld cables and running gear attached. Easy maintenance. With front panel maintenance displays, you know when your equipment needs to be serviced. *Compared to previous model. Front panel fuel and sight gauges provide convenient fuel level indication. Versatile AC and DC weld output provide quality welds on all types of metals. DC is smooth and easy to run while AC Stick is used when arc blow occurs. Note: Diesel engine will shut down before system runs out of fuel making restarts easy. Welder/generator is warranted for 3 years, parts and labor. Engine is warranted separately by the engine manufacturer. Equipment Sales US and Canada An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1

Specifications Welding Mode (Subject to change without notice.) Amp/Volt Ranges Weld Output Rated at 100% Duty Cycle (at 104° F/40° C)* CC/AC CC/DC Sound Levels at Rated Output, 7 m (23 ft.) Single-Phase Generator Power Peak: 11,000 watts Continuous: 9500 watts 120/240 VAC, 88/44 A, 60 Hz *Rated at sea level. **Net weight without fuel. Certified by Canadian Standards Association to both the Canadian and U.S. Standards. Engine Specifications Engine Brand/ Warranty Kubota: 2-year limited North American mfg. (Engines warranted separately by the engine manufacturer.) Weld Speed Idle Speed Fuel...

Open the catalog to page 2

The Bobcat™ Generator Power Advantage TYPICAL EQUIPMENT POWER USAGE Bobcats will easily start and run the following equipment: Accu-Rated – Not Inflated Generator Power ™ Starting Watts Miller’s Accu-Rated™ 11,000 watts of usable peak power is delivered for a minimum of 30 seconds. Accu-Rated means peak power is usable for maximum generator loads such as plasma cutting, Millermatic® MIG welders and motor starting. Accu-Rated peak power beats the competition’s very short-duration peak or surge power. Use your peak power, it’s more than a number. Running Watts Hand Drill (1/2 inch) To select...

Open the catalog to page 3

Genuine Miller Options ® GFCI Protection #300 975 Field Kit contains two GFCI 120 VAC duplex receptacles. Cold Weather Kit #301 115 Field Includes block heater for improved starting, and a fuel heater for optimal filtration in cold temperatures. Full KVA Plug Kit #119 172 Field 120/240 VAC, 50-amp plug (NEMA 14-50P) to fit full KVA receptacle. Female Receptacle Adapter Cord, Full KVA #300 517 Field NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120/240 V plug to common Millermatic® and Spectrum® 240 V plug. Order the following from Miller Service Parts. Diesel Engine Filter Kit #259 935...

Open the catalog to page 4

Genuine Miller Accessories ® MIG/Flux Cored Welding Spoolmate™ 3035 Spool Gun #195 016 Use with SGA 100C Control and HeavyDuty Barrel. Spool gun for aluminum and other wires. Four-inch spools; .023–.035 inch (0.6– 0.9 mm) aluminum, steel and stainless steel. Rated at 150 amps, 60 percent duty cycle with 20-foot (6 m) cable assembly. Millermatic 211 Auto-Set with MVP shown. Millermatic® 140 Auto-Set™ #907 335 See Lit. Index No. DC/12.42 Millermatic® 180 Auto-Set™ #907 312 See Lit. Index No. DC/12.44 Millermatic® 211 Auto-Set™ with MVP™ #907 422 See Lit. Index No. DC/12.54 Millermatic® 212...

Open the catalog to page 5

Typical Installations for Bobcat™ 250 Stick (SMAW) Basic Equipment • Four-position range switch provides fine amperage control for typical electrode diameters (3/32, 1/8, 5/32 and 3/16 in.). • AC weld output for good arc quality with iron powder electrodes without fighting magnetic arc blow. • Strong auxiliary power while welding — for example, if you are welding at 250 amps the Bobcat delivers 2200 watts of power to run tools, lights etc. Stick Electrode Flux-Cored (FCAW) Basic Equipment SuitCase® X-TREME™ 8VS #951 181 SuitCase® X-TREME™ 12VS #951 543 • 275 amps at 25 volts, 60 percent...

Open the catalog to page 6

Ordering Information Equipment and Options Kubota, with GFCI Receptacles Kubota GFCI Protection Spark Arrestor Adapter Cord, Full KVA Diesel Engine Filter Kit Field. (Order from Miller Service Parts) All-Purpose Running Gear With Never Flat™ tires Protective Cage with Cable Holders Not for use with Protective Cover Gas Cylinder Mounting Assembly Not recommended for use with Protective Cover Protective Cover Stick Weld Leads Spectrum® Plasma Cutters Millermatic® Series MIG Welders SuitCase® X-TREME™ Wire Feeders Heavy-Duty Barrel for Spoolmate 3035 115 VAC. Requires Secondary Contactor...

Open the catalog to page 8