*mydirectindustry

Catalogs
MILACRON
TempMaster iM2

TempMaster iM2

Product catalog summary

Integration Overview
The TempMaster M2 controller can be seamlessly integrated into any injection molding machine, enhancing precision and eliminating the need for a separate controller footprint. A single Human-Machine Interface (HMI) is used for all control requirements, ensuring total control and integration.

Key Features

Adaptive Process System (APS) technology for faster processing and response time.
Available in configurations from 4 to 144 zones.
Communication options include serial-SPI, Ethernet-VNC, RDP, Modbus, and Powerlink.
Standard M2 control cards available in 5A, 15A, 30A, and 40A.
Built-in Uninterruptible Power Supply (UPS) and IO functions linked to machine interlocking.
0.1-degree control accuracy with unique soft-start and continuous Ground Fault Detection.
Automatic tool diagnostics, plastic leak detection, and color change optimization with Purge Wizard.
Hot runner performance tracking, tool ID, and water flow monitoring systems.
Built-in sequential valve gating functions and easy-to-use 3D graphics with HMI touch screen.
Data export capabilities for analysis.

Specifications

Calibration Accuracy: 1°F / 0.5°C
Control Accuracy: +/-1°
Power Response Time: 8.3 ms at 60 Hz
Control Algorithm: Adaptive PID2 with auto-tuning
Operating Range: 0 - 472°C or 32 - 882°F
Output Voltage: 240 VAC
Supply Voltage: 200/240v 3P Delta or 380/440v 3P Star – 480v 3P with transformer option
Frequency: 50 - 60 Hz automatic switching
Ambient Temperature Range: 15 - 45°C
Humidity Range: 15 - 45°C or 41 - 113°F
Ground Fault Detection: 20 mA per zone
Power Control: Burst fired or phase firing
Overload Protection: Semi-conductor fuses on both heater legs
Control Modes: Closed loop (Auto), open loop (Manual), standby mode or boost
Alarm Output: Closing contact relay, max. 5A, 230V
TC Connector and Power Connector: Various options available
LED Indicators: Fuse, thermocouple failure, ground fault, power % indicator
Soft-Start with Auto Tune: Using unique low voltage method for heater safety
Input Protection: Plug in nano fuses on both TC legs

Catalog excerpts

TempMaster g/jvnINTEGRATE THE M2 CONTROLLER INTO YOUR INJECTION MOLDING MACHINE Now our TempMaster M2 controller can be fully integrated into any injection molding machine allowing for optimal precision while eliminating the entire controller footprint. A single HMI can now be used for all control requirements. Total control - fully integrated. All TempMaster controllers feature the NEW Adaptive Process System (APS) technology providing faster processing and response time including technologies to prevent damage caused by power/thermocouple wiring issues. BENEFITS 0 Available from 4-144 zones [Tf Flexible options: Use serial -SPI, Ethernet - VNC, RDP, Modbus, Powerlink to communicate with IMM - HMlwith IMM - HMI Uses standard M2 control cards: 5A, 15A, 30A, 40A 0 Built in UPS supply 0 Built-in IO functions linked to machine interlocking 0 0.1 degree control accuracy 0 Unique soft-start & continuous Ground Fault Detection 0 Fully automatic tool diagnostic 0 Plastic leak detection 0 Color change optimization with Purge Wizard 0 Hot runner performance tracking system 0 Tool ID system 0 Water flow monitoring system 0 Built-in sequential valve gating functions 0 Easy to use 3D graphics with HMI touch screen 0 Mold pictures and tool storage info 0 Data can be exported for analysis performance delivered © 2015 Milacron LLC. All Rights Reserved. Mold-Masters® and the Mold-Masters logo are trademarks of Milacron LLC and/or its affiliates Mold-Masters (2007) Limited, DME Company LLC, and Cimcool Fluid Technology (collectively, “Milacron”). E7528-1

Open the catalog to page 1

TempMaster g/jvnSPECIFICATIONS TempMaster M2 Controller Specifications Mold Masters’ performance delivered © 2015 Milacron LLC. All Rights Reserved. Mold-Masters® and the Mold-Masters logo are trademarks of Milacron LLC and/or its affiliates Mold-Masters (2007) Limited, DME Company LLC, and Cimcool Fluid Technology (collectively, “Milacron”). E7528-1

Open the catalog to page 2

TempMaster iM2

TempMaster iM2

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs