*mydirectindustry

Catalogs
MILACRON
Power Pak440

Power Pak440

Product catalog summary

Injection Unit Specifications
The document provides detailed specifications for various injection units, categorized by models A, B, and C. Key parameters include injection capacity, theoretical displacement, maximum pressure and rate, injection speed, and screw diameter. Optional features such as increased injection speed and extruder L/D ratio are also mentioned.

Injection Performance
The performance metrics include maximum pressure at specific rates, maximum rate at pressure, and maximum injection speed. The document specifies the maximum pack pressure and pull-back force, along with the injection stroke and screw diameter.

Clamp Specifications
The clamp specifications cover tonnage, maximum daylight, mold height, mold weight, and clamp stroke. The Euromap dry cycle time and platen size are also detailed, along with tie bar spacing and ejector specifications.

Machine Specifications
Dimensions such as length, width, height, and centerline height are provided, along with the shipping weight of the machine. Requirements for water and air supply are specified.

Electrical Specifications
The document outlines the input power source and power supply capacity, with notes on standard configurations and options for increased capacities.

Additional Notes
Various notes highlight optional features and configurations, such as increased injection velocity, extruder RPM options, and ejector speed and force enhancements. It is noted that all machine dimensions and specifications are subject to change and are provided for reference only.

Diagrams and Templates
The document includes diagrams and templates illustrating the machine layout, platen area, and robot mounting patterns. Key dimensions and features are annotated for clarity.

Catalog excerpts

Technical Specifications All-Electric 55 Frame Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Injection Performance Optional Increased Speed * Max Pull Back Force Injection Stroke Screw Diameter Extruder L/d Ratio ** Extruder Performance *** Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications**** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power Supply Capacity kVA Machine Requirements Water *Note: Increased injection velocity option will improve injection rates **Note: Increased L/d options available ***Note: Increased extruder rpm options available ****Note: All machine dimensions and specifications are subject to change. Values are for reference o

Open the catalog to page 1

Technical Specifications 1650 Hybid Frame* Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Injection Stroke Screw Diameter Injection Performance Extruder L/d Ratio ** Extruder Performance *** Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power Supply Capacity...

Open the catalog to page 2

Technical Specifications I45 Frame Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Max Pull Back Force Plunger Stroke Plunger Diameter Extruder RPM - High Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications**** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power Supply Capacity kVA Machine Requirements...

Open the catalog to page 3

Technical Specifications I44 Frame Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Injection Performance Max Pull Back Force Plunger Stroke Plunger Diameter Extruder L/d Ratio - 70mm Extruder Performance - 70mm Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications**** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications**** Input Power Source 460 VAC ± 10% 3 Ph 60...

Open the catalog to page 4

Technical Specifications I78 Hybrid Frame Injection Unit Specifications Injection Capacity, Max GPPS Theoretical Disp Max Pull Back Force Plunger Stroke Plunger Diameter Injection Performance Extruder L/d Ratio - 70mm* Extruder RPM - Low Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Shipping Weight (power unit) Electrical Specifications*** Input Power...

Open the catalog to page 5

Top View 410 330 [16.1] [13.0] INSIDE STAT PLATEN GATES THICKNESS 728 857 [28.6] [33] INSIDE OUTSIDE GATES GATES 1962 [77.3] ELECTRICAL CABINET DOOR SWIVEL 135 1615 [5.3] [63.6] STRAIN CONTROL ROD SWIVEL 5018.6 [197.58] CLAMP SHIPPING LENGTH 1400 GATE STROKE 675 [26.6] CLAMP STROKE 2529 [99.6] FOR EXTRUDER SCREW REMOVAL 514 [20.2] PART DROP W/O GUARD 886 [34.9] PART DROP 1188 [46.8] 1324 [52.1] TOP OF LOWER STRAIN ROD C.L. OF CONTROL SCREEN 9371.7 [368.96] OVERALL LENGTH INCLUDING SLED TRAVEL Front View FEEDTHROAT HEIGHT

Open the catalog to page 6

78 [ 3.1 ] GATE HANDLE 39 [ 1.5 ] 2163 [ 85.1 ] TOP OF STRAIN ROD -INCH0.750-10 UNC-2B, 1.44 DP (12X) SPI ROBOT MOUNTING HOLES PATTERN #5 Feed Throat Robot Mounting Feed throat dimensions can change based on injection frame. Consult factory for specific details.

Open the catalog to page 7

HOLE DESCRIPTION “A” Ø0.750-10 UNC-2B, 1.44” DP (108 X) EACH PLATEN “B” Ø27.0 THRU (12X) CORRESPONDING HOLES IN K/O BAR Ø0.562”, THRU “C” Ø27.0 THRU (1x) CORRESPONDING HOLE IN K/O BAR Ø0.500-13 UNC-2B, THRU “D” Ø52.4 THRU (8X) CORRESPONDING HOLES IN K/O BAR Ø0.562”, THRU "A" MOVING AND STATIONARY PLATEN 127.0 177.8 VIEW OF MOVING PLATEN FACE SCALE 0.200 Die Space 288.0 TO K/O BAR FACE AT MAX EJECT STROKE 125 1113.5 STANDARD ELECTRIC EJECT 602.5 ROBOT MOUNTING FACE 840.0 BETWEEN STRAIN RODS +0.05 101.60 0 DIE LOCATING RING I.D. 585.0 STATIONARY PLATEN MOVING PLATEN 675.0 CLAMP STROKE 500.0 MOLD...

Open the catalog to page 8

Power Pak440

Power Pak440

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs