Technical Specifications I45 Frame Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Injection Performance Max Pull Back Force Plunger Stroke Plunger Diameter Extruder RPM - High Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power Supply Capacity   kVA Machine Requirements Water *Note: Other capacities available. Please Consult Factory. **Note: Higher eject force and speed available. Please Consult Factory. ***Note: All machine dimensions and specifications are subject to change. Values are for reference o

Technical Specifications I49 Frame Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Injection Performance Max Pull Back Force Plunger Stroke Plunger Diameter Extruder RPM - High Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power Supply Capacity   kVA...

Technical Specifications I78 Hybrid Frame Injection Unit Specifications Injection Capacity, Max GPPS Theoretical Disp Max Pull Back Force Plunger Stroke Plunger Diameter Injection Performance Extruder RPM - High Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length Centerline Height Shipping Weight (machine) Shipping Weight (power unit) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz...

2812 [110.7] AIR CONNECTION OPTIONAL ROLL AROUND CORE PULL UNIT 600 [23.6] INSIDE OF GATE FRAME 1724 [67.9] MIN. SCREW REMOVAL CLEARANCE 1619 [63.8] AIR CONNECTION 174 [6.9] AIR CONNECTION FROM BASE SIDE 148 [5.8] FEEDTHROAT OPENING FROM BASE SIDE 679 [26.7] [37.2] 557 [21.9] FEEDTHROAT FEEDTHROAT WATER OPENING CONNECTIONS MOLD FACE 153 [6.0] INSIDE OF GATE FRAME OPTIONAL MOVABLE TRANSFORMER 12310 [484.6] MAX LENGTH INCLUDING SLED STROKE Front View

152 [ 6.0 ] MOLD WATER MOVING PLATEN 31 [ 1.2 ] MOLD WATER STAT. PLATEN 120 [ 4.7 ] MOLD WATER STAT. PLATEN 1590 [ 62.6 ] 27 [ 1.1 ] MOLD WATER MOVING PLATEN 261 [ 10.3 ] MOLD WATER STAT. PLATEN 350 [ 13.8 ] MOLD WATER STAT. PLATEN INCH THREAD Ø 0.875, 3.00 DEEP 1.000-8 UNC-2B, 2.00 DEEP ( 12 ) PLACES ROBOT MOUNTING HOLES SPI PATTERN #6 Robot Mounting Feed throat dimensions can change based on injection frame. Consult factory for specific details.

"A" MOVING AND STATIONARY PLATENS MINIMUM MOLD SIZE "B" MOVING PLATEN 508.0 [ 20.00 ] SECTION SCALE HOLE DESCRIPTION “A” 1.00-8 UNC-2B, 1.88” DP (154) PLACES EACH PLATEN “B” Ø52.4 THRU (21) HOLES, INCLUDING CTR HOLE CORRESPONDING HOLES IN K/O Ø.811” THRU “C” 0.500-13 UNC-2B 1.00” DP “D” Ø27.0 THRU (8) HOLES CORRESPONDING HOLES IN K/O Ø.811” THRU 750.0 [ 29.53 ] MOLD HEIGHT ADJUSTMENT 775.0 [ 30.51 ] TO ROBOT MOUNTING FACE 478.0 D [ 18.82 ] DISTANCE TO K/O BAR FACE AT MAX EJECT STROKE 200.0 [ 7.87 ] CLAMP STROKE Platen Area