Technical Specifications I45 Frame Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Max Pull Back Force Plunger Stroke Plunger Diameter Extruder RPM - High Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power Supply Capacity   kVA Machine Requirements Water *Note: Other capacities available. Please Consult Factory. **Note: Higher eject force and speed available. Please Consult Factory. ***Note: All machine dimensions and specifications are subject to change. Values are for reference

Technical Specifications I49 Frame Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Injection Performance Max Pressure @ Rate Max Pull Back Force Plunger Stroke Plunger Diameter Extruder RPM - High Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power...

Technical Specifications I78 Hybrid Frame Injection Unit Specifications Injection Capacity, Max GPPS Theoretical Disp Max Pull Back Force Plunger Stroke Plunger Diameter Injection Performance Extruder RPM - High Torque Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Shipping Weight (power unit) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3...

Top View OPTIONAL ROLL AROUND CORE PULL UNIT 620 [24.4] INSIDE GATE FRAME *3073 [121.0] MINIMUM SCREW REMOVAL CLEARANCE 2652 [104.4] FEEDTHROAT WATER 14 [0.5] FEEDTHROAT OPENING FROM BASE SIDE 718 647 [25.5] [28.3] FEEDTHROAT FEEDTHROAT WATER OPENING CONNECTIONS ø180 [7.1] STRAIN ROD 1020 [40.2] BETWEEN STRAIN RODS [70.5] 170 MOSAI [6.7] SWIVELC INSIDE GATE FRAME OPTIONAL MOVABLE TRANSFORMER BETWEEN STRAIN RODS 259 [10.2] 1304 cL MAX. VERTICAL PARTS 964 [38.0] TOP OF DROP OPENING [51.3] LOWER 1470 OF MOSAIC STRAIN ROD CONTROL [57.9] 11382 [448.1] OVERALL LENGTH *11587 [456.2] MAX LENGTH INCLUDING...

80 [ 3.2 ] 359.6 [ 14.16 ] MOLD WATER STAT PL 270.7 [ 10.66 ] MOLD WATER STAT PL 129.6 [ 5.10 ] 40.7 MOLD WATER [ 1.60 ] STAT PL MOLD WATER STAT PL -INCHØ 0.656 , 2.12 DEEP .750-10 UNC-2B , 1.50 (12) PLACES ROBOT MOUNTING HOLES Robot Mounting Feed Throat Feed throat dimensions can change based on injection frame. Consult factory for specific details.

CS1 CS0 "A" STATIONARY AND MOVING PLATENS "B" MOVING PLATEN "C" MOVING PLATEN SECTION SCALE HOLE DESCRIPTION “A” 1.00-8 UNC-2B, 1.88” DP (132) PLACES EACH PLATEN “B” Ø27.0 THRU (12) HOLES CORRESPONDING HOLES IN K/O Ø.811” THRU “C” Ø27.0 THRU (1) HOLE CORRESPONDING HOLE IN K/O BAR Ø0.500-13 UNC-2B, 1.00” DP “D” Ø52.4 THRU (16) HOLES CORRESPONDING HOLES IN K/O Ø.811” THRU 600.0 [ 23.62 ] MOLD HEIGHT ADJUSTMENT MOVING PLATEN 424.0 [ 16.69 ] DISTANCE TO K/O BAR FACE AT MAX EJECT STROKE STATIONARY PLATEN 4.8 [ 0.19 ] NOZZLE PROTRUSION 750.0 [ 29.53 ] TO ROBOT MOUNTING FACE