*mydirectindustry

Catalogs
MILACRON
MAGNA T90

MAGNA T90

Product catalog summary

Technical Specifications Overview:

This document provides detailed technical specifications for the Magna Toggle Series injection molding machines, specifically focusing on the 32mm and 40mm frame sizes.

General Specifications:

Electrical Motor: 15 hp (11.5 kW)
Total Oil Capacity: 58 gallons (220 liters)
Water Supply: 10.6 gal/min (40 L/min) at 29°C inlet temperature
Connected Load: 18.8 kW for 32mm frame, 24.6 kW for 40mm frame
Overall Dimensions: 13.0 x 4.9 x 6.8 ft (3.98 x 1.5 x 2.1 m) for 32mm frame, 13.0 x 4.9 x 6.8 ft (4.48 x 1.5 x 2.1 m) for 40mm frame
Machine Weight: 8,904 lbs (4,039 kg) for 32mm frame, 9,868 lbs (4,476 kg) for 40mm frame

Injection Unit Specifications:

Injection Capacity: Ranges from 3.5 oz (99 gms) to 11.9 oz (336 gms)
Theoretical Displacement: Ranges from 6.3 in³ (104 cm³) to 21.5 in³ (353 cm³)
Maximum Injection Pressure: Ranges from 17,400 psi (1,204 bar) to 30,000 psi (2,074 bar)
Injection Rate: Ranges from 6.0 in³/sec (99 cm³/sec) to 11.2 in³/sec (183 cm³/sec)
Screw Diameter: Ranges from 1.26 in (32 mm) to 1.97 in (50 mm)
Screw Speed: 298 rpm for 32mm frame, 237 rpm for 40mm frame

Clamp Specifications:

Clamping Force: 89 tons (800 kN)
Clamp Stroke: 12.2 in (310 mm)
Ejector Stroke: 4.7 in (120 mm)
Maximum Daylight: 28 in (710 mm)
Platen Size: 24.0 x 22.2 in (610 x 565 mm)
Distance Between Tie Rods: 15.9 x 14.1 in (405 x 360 mm)

Notes:

All machine dimensions and specifications are subject to change and are for reference only.
Additional cabinet dimensions are 1.96 ft x 1.4 ft x 4.2 ft with a 16 ft cable.
Values are based on standard machine horsepower and voltage (460v/3ph/60Hz) with no additional options.

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Water Supply (29°C Inlet Temp) Connected Load 3 TECHNICAL SPECIFICATIONS Overall Dimensions (L × W × H) Machine Weight Injection Unit Specifications Injection Capacity, Maximum GPPS Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1002.A.02.18 Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Screw Speed Screw Torque oz/sec gm/sec Plasticizing Rate (GPPS)

Open the catalog to page 1

32mm Frame ENGLISH METRIC Injection Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only....

Open the catalog to page 2

MAGNA T90

MAGNA T90

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs