*mydirectindustry

Catalogs
MILACRON
Magna T610

Magna T610

Product catalog summary

Technical Specifications Overview

This document provides detailed technical specifications for the Toggle Series Magna 610 injection molding machines, specifically the 3470 and 4880 frame sizes.

General Specifications

Electrical Motor: 51.8 hp (38.7 kW) for 3470 frame, 67.3 hp (50.2 kW) for 4880 frame.
Total Oil Capacity: 198.4 gallons (750 L) for 3470 frame, 359.8 gallons (1,360 L) for 4880 frame.
Water Supply: 26.5 gal/min (100 L/min) for 3470 frame, 39.7 gal/min (150 L/min) for 4880 frame.
Connected Load: 96.6 kW for 3470 frame, 104.1 kW for 4880 frame.
Machine Weight: 67,792 lbs (30,750 kg) for 3470 frame, 73,083 lbs (33,150 kg) for 4880 frame.

Injection Unit Specifications

Injection Capacity: Ranges from 46.5 oz (1,318 gms) to 105.4 oz (2,989 gms) depending on the frame.
Theoretical Displacement: Ranges from 84.5 in³ (1,385 cm³) to 191.7 in³ (3,142 cm³).
Maximum Injection Pressure: Ranges from 21,900 psi (1,515 bar) to 33,100 psi (2,289 bar).
Screw Diameter: Ranges from 2.76 in (70 mm) to 3.93 in (100 mm).
Screw Speed: Up to 235 rpm.

Clamp Specifications

Clamping Force: 617 tons (5,500 kN) for both frames.
Clamp Stroke: 36.2 in (920 mm).
Eject Force: 13.5 tons (120 kN).
Maximum Daylight: 71.7 in (1,820 mm).
Platen Size: 52.36 x 51.18 in (1,330 x 1,300 mm).

Notes

All specifications are subject to change and are for reference only. Consult a Milacron representative for detailed drawings and additional options.

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min TECHNICAL SPECIFICATIONS Electrical Motor Machine Weight Water Supply (29°C Inlet Temp) Connected Load Injection Unit Specifications Injection Capacity, Maximum GPPS Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Screw Speed Plasticizing Rate (GPPS) Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1011.A.02.18 oz/sec gm/sec

Open the catalog to page 1

3470 Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

Magna T610

Magna T610

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs