*mydirectindustry

Catalogs
MILACRON
MAGNA T55

MAGNA T55

1 / 2 PagesView full catalog

MAGNA T55

Product catalog summary

Technical Specifications Overview

General Specifications:

Frame Sizes: 28mm and 32mm
Tonnage: 55
Electrical Motor: 15 hp (11.5 kW)
Total Oil Capacity: 55 gallons (208 liters)
Water Supply: 10.6 gal/min (40 L/min)
Connected Load: 17.9 kW to 18.8 kW
Machine Weight: 6,393 lbs (2,900 kg) for 28mm frame, 7,055 lbs (3,200 kg) for 32mm frame

Injection Unit Specifications:

Injection Capacity: Ranges from 2.3 oz (64 gms) to 6.0 oz (171 gms)
Theoretical Displacement: 4.1 in³ (67 cm³) to 11.0 in³ (180 cm³)
Maximum Injection Pressure: 18,100 psi (1,251 bar) to 30,000 psi (2,074 bar)
Injection Rate: 6.2 in³/sec (102 cm³/sec) to 10.4 in³/sec (171 cm³/sec)
Screw Diameter: 1.10 in (28 mm) to 1.65 in (42 mm)
Screw Speed: 400 rpm
Plasticizing Rate: 0.4 oz/sec (12 gm/sec) to 0.8 oz/sec (23 gm/sec)

Clamp Specifications:

Clamping Force: 56 tons (500 kN)
Clamp Stroke: 11 in (280 mm)
Clamp Close/Open Velocity: 17.7 in/sec (450 cm/sec) and 15.7 in/sec (400 cm/sec) respectively
Eject Force: 3.6 tons (32 kN)
Ejector Stroke: 3.9 in (100 mm)
Maximum Daylight: 24.8 in (630 mm)
Minimum/Maximum Mold Height: 5.9 in (150 mm) to 13.8 in (350 mm)
Maximum Mold Weight: 926 lbs (420 kg)
Platen Size: 19.6 x 19.0 in (500 x 485 mm)
Distance Between Tie Rods: 12.7 x 12.2 in (325 x 310 mm)

Notes:

All specifications are subject to change and are for reference only.
Consult Milacron representative for detailed assembly drawings.
Values are based on standard machine horsepower and voltage (460v/3ph/60Hz).

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Water Supply (29°C Inlet Temp) Connected Load 3 TECHNICAL SPECIFICATIONS Overall Dimensions (L × W × H) Machine Weight Injection Unit Specifications Injection Capacity, Maximum GPPS Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1001.A.02.18 Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Screw Speed Screw Torque Plasticizing Rate (GPPS) oz/sec gm/sec

Open the catalog to page 1

28mm Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

All MILACRON catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list