*mydirectindustry

Catalogs
MILACRON
MAGNA T400

MAGNA T400

Product catalog summary

Technical Specifications Overview

This document provides detailed technical specifications for the Toggle Series Magna 400 injection molding machines, specifically the 2290 and 3470 frame sizes.

General Specifications

Electrical Motor: 34 hp (25.1 kW)
Total Oil Capacity: 162.7 gallons (615 liters)
Water Supply: 26.5 gallons/min (100 liters/min)
Connected Load: 64.7 kW for 2290 frame, 83 kW for 3470 frame
Machine Weight: 39,683 lbs (18,000 kg) for 2290 frame, 40,785 lbs (18,500 kg) for 3470 frame

Injection Unit Specifications

Injection Capacity: Ranges from 30.4 oz (861 gms) to 76.9 oz (2,179 gms) depending on the frame and configuration
Theoretical Displacement: Ranges from 55.2 in³ (905 cm³) to 139.7 in³ (2,290 cm³)
Maximum Injection Pressure: Ranges from 20,600 psi (1,421 bar) to 33,100 psi (2,289 bar)
Injection Rate: Ranges from 16.5 in³/sec (270 cm³/sec) to 29.3 in³/sec (480 cm³/sec)
Screw Diameter: Ranges from 2.36 in (60 mm) to 3.54 in (90 mm)

Clamp Specifications

Clamping Force: 393 tons (3,500 kN)
Clamp Stroke: 26.6 in (675 mm)
Eject Force: 7.9 tons (70 kN)
Maximum Daylight: 58.1 in (1,475 mm)
Platen Size: 40.6 x 40.6 in (1,030 x 1,030 mm)

Notes

All machine dimensions and specifications are subject to change and are for reference only.
Values are based on standard machine horsepower and voltage (460v/3ph/60Hz) without additional options.

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Machine Weight Water Supply (29°C Inlet Temp) Connected Load 2 TECHNICAL SPECIFICATIONS Injection Unit Specifications Injection Capacity, Maximum GPPS Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1008.A.02.18 Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Plasticizing Rate (GPPS) Screw Speed oz/sec gm/sec

Open the catalog to page 1

2290 Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

MAGNA T400

MAGNA T400

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs