*mydirectindustry

Catalogs
MILACRON
MAGNA T310

MAGNA T310

Product catalog summary

Technical Specifications Overview

This document provides detailed technical specifications for the Milacron Toggle Series Magna 310 injection molding machines, specifically for the 1540 and 2290 frame sizes.

General Specifications

Electrical Motor: 34 hp (25.1 kW)
Total Oil Capacity: 162.7 gallons (615 liters)
Water Supply: 19.8 gallons/min (75 liters/min)
Connected Load: 50 kW
Machine Weight: 29,034 lbs (13,170 kg) for 1540 frame, 30,820 lbs (13,980 kg) for 2290 frame

Injection Unit Specifications

Injection Capacity: Ranges from 18.4 oz (363 gms) to 54.0 oz (1,530 gms)
Theoretical Displacement: Ranges from 33.6 in³ (550 cm³) to 98.1 in³ (1,608 cm³)
Maximum Injection Pressure: Up to 32,459 psi (2,238 bar)
Injection Rate: Ranges from 15 in³/sec (246 cm³/sec) to 29.3 in³/sec (480 cm³/sec)
Screw Diameter: Ranges from 1.97 in (50 mm) to 3.15 in (80 mm)

Clamp Specifications

Clamping Force: 309 tons (2,750 kN)
Clamp Stroke: 24 in (610 mm)
Eject Force: 8.3 tons (74 kN)
Maximum Daylight: 53.5 in (1,360 mm)
Platen Size: 37 x 37 in (940 x 940 mm)

Notes

All machine dimensions and specifications are subject to change and are for reference only.
Values are based on standard machine horsepower and voltage (460v/3ph/60Hz) without additional options.

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Machine Weight Water Supply (29°C Inlet Temp) Connected Load 2 TECHNICAL SPECIFICATIONS Injection Unit Specifications Injection Capacity, Maximum GPPS Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Screw Speed Plasticizing Rate (GPPS) Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1007.A.02.18 oz/sec gm/sec

Open the catalog to page 1

1540 Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

MAGNA T310

MAGNA T310

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs