*mydirectindustry

Catalogs
MILACRON
MAGNA T225

MAGNA T225

Product catalog summary

Technical Specifications Overview

This document provides detailed technical specifications for the Toggle Series Magna machines, specifically the 970 and 1540 frame sizes. The specifications are presented in both English and Metric units.

General Specifications

Electrical Motor: 18 hp (13.6 kW)
Total Oil Capacity: 139 gallons (525 liters)
Water Supply: 19.8 gal/min (75 L/min) at 29°C inlet temperature
Connected Load: 30.5 kW for 970 frame, 38.5 kW for 1540 frame
Machine Weight: 21,098 lbs (9,570 kg) for 970 frame, 22,046 lbs (10,000 kg) for 1540 frame

Injection Unit Specifications

Injection Capacity: Ranges from 12.8 oz (363 gms) to 36.2 oz (1,025 gms) depending on the frame
Theoretical Displacement: Ranges from 23.3 in³ (382 cm³) to 65.8 in³ (1,078 cm³)
Maximum Injection Pressure: Up to 32,600 psi (2,249 bar)
Injection Rate: Up to 17.7 in³/sec (291 cm³/sec)
Screw Diameter: Ranges from 1.77 in (45 mm) to 2.76 in (70 mm)

Clamp Specifications

Clamping Force: 224 tons (2,000 kN)
Clamp Stroke: 20.1 in (510 mm)
Eject Force: 4.9 tons (44 kN)
Maximum Daylight: 48 in (1,220 mm)
Platen Size: 31.9 x 31.9 in (810 x 810 mm)

Notes

All machine dimensions and specifications are subject to change and are for reference only.
Values are based on standard machine horsepower and voltage (460v/3ph/60Hz) without additional options.

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Machine Weight Water Supply (29°C Inlet Temp) Connected Load 2 TECHNICAL SPECIFICATIONS Injection Unit Specifications Injection Capacity, Maximum GPPS Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1006.A.02.18 Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Plasticizing Rate (GPPS) Screw Speed oz/sec gm/sec

Open the catalog to page 1

970 Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

All MILACRON catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list