*mydirectindustry

Catalogs
MILACRON
MAGNA T170

MAGNA T170

Product catalog summary

Technical Specifications Overview

This document provides detailed technical specifications for the Toggle Series Magna injection molding machines, specifically the 630 and 970 frame sizes.

General Specifications

Electrical Motor: 15 hp (11.5 kW)
Total Oil Capacity: 110 gallons (415 liters)
Water Supply: 13.2 gallons/min (50 liters/min)
Connected Load: 27.2 kW for 630 frame, 28.4 kW for 970 frame
Machine Weight: 15,696 lbs (7,120 kg) for 630 frame, 16,755 lbs (7,600 kg) for 970 frame

Injection Unit Specifications

Injection Capacity: Ranges from 8.4 oz (239 gms) to 22.8 oz (646 gms) depending on the model
Theoretical Displacement: Ranges from 15.3 in³ (251 cm³) to 41.4 in³ (679 cm³)
Maximum Injection Pressure: Ranges from 20,700 psi (1,428 bar) to 36,100 psi (2,492 bar)
Injection Rate: Ranges from 6.4 in³/sec (105 cm³/sec) to 11.3 in³/sec (186 cm³/sec)
Screw Diameter: Ranges from 1.57 in (40 mm) to 2.36 in (60 mm)
Screw Speed: 222 rpm for 630 frame, 188 rpm for 970 frame

Clamp Specifications

Clamping Force: 168 tons (1,500 kN)
Clamp Stroke: 17.3 in (440 mm)
Eject Force: 4.9 tons (44 kN)
Maximum Daylight: 37.4 in (950 mm)
Platen Size: 29.1 x 29.1 in (740 x 740 mm)
Distance Between Tie Rods: 20.1 x 20.1 in (510 x 510 mm)

Notes

All machine dimensions and specifications are subject to change. Values are for reference only.
Specifications are based on standard machine horsepower and voltage (460v/3ph/60Hz) with no additional options.

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Machine Weight Water Supply (29°C Inlet Temp) Connected Load 2 TECHNICAL SPECIFICATIONS Injection Unit Specifications Injection Capacity, Maximum GPPS Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1005.A.02.18 Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Plasticizing Rate (GPPS) Screw Speed oz/sec gm/sec

Open the catalog to page 1

630 Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

MAGNA T170

MAGNA T170

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs