*mydirectindustry

Catalogs
MILACRON
MAGNA T140

MAGNA T140

1 / 2 PagesView full catalog

MAGNA T140

Product catalog summary

Technical Specifications Overview

General Specifications:

Frame Sizes: 450 Frame, 630 Frame
Tonnage: 140
Electrical Motor: 15 hp (11.5 kW)
Total Oil Capacity: 70 gal (265 L)
Water Supply: 13.2 gal/min (50 L/min)
Connected Load: 22.8 kW (450 Frame), 27.2 kW (630 Frame)
Machine Weight: 11,561 lbs (5,255 kg) for 450 Frame, 12,874 lbs (5,840 kg) for 630 Frame

Injection Unit Specifications:

Injection Capacity (Maximum GPPS): Ranges from 5.8 oz (165 gms) to 13.2 oz (374 gms)
Theoretical Displacement: Ranges from 10.6 in³ (173 cm³) to 24.0 in³ (393 cm³)
Maximum Injection Pressure: Ranges from 22,700 psi (1,568 bar) to 36,100 psi (2,492 bar)
Injection Rate: Ranges from 6.3 in³/sec (103 cm³/sec) to 10.4 in³/sec (170 cm³/sec)
Screw Diameter: Ranges from 1.38 in (35 mm) to 1.97 in (50 mm)
Screw Speed: 279 rpm (450 Frame), 222 rpm (630 Frame)

Clamp Specifications:

Clamping Force: 140 ton (1,250 kN)
Clamp Stroke: 13.8 in (350 mm)
Clamp Close/Open Velocity: 16.5 in/sec (420 cm/sec) close, 22.6 in/sec (575 cm/sec) open
Eject Force: 3.9 tons (35 kN)
Ejector Stroke: 4.7 in (120 mm)
Maximum Daylight: 32.7 in (830 mm)
Platen Size: 25.7 x 25.7 in (655 x 655 mm)
Distance Between Tie Rods: 17.1 x 17.1 in (435 x 435 mm)

Notes:

All machine dimensions and specifications are subject to change and are for reference only.
Values are based on standard machine horsepower and voltage (460v/3ph/60Hz) without additional options.

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Machine Weight Water Supply (29°C Inlet Temp) Connected Load 2 TECHNICAL SPECIFICATIONS Injection Unit Specifications Injection Capacity, Maximum GPPS Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1004.A.02.18 Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Plasticizing Rate (GPPS) Screw Speed oz/sec gm/sec

Open the catalog to page 1

450 Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

All MILACRON catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list