*mydirectindustry

Catalogs
MILACRON
MAGNA T125

MAGNA T125

Product catalog summary

Technical Specifications Overview

This document provides detailed technical specifications for the Toggle Series Magna injection molding machines, specifically the 450 and 630 frame sizes.

General Specifications

Electrical Motor: 15 hp (11.5 kW)
Total Oil Capacity: 70 gallons (265 liters)
Water Supply: 13.2 gal/min (50 L/min) at 29°C inlet temperature
Connected Load: 22.8 kW for 450 frame, 27.2 kW for 630 frame
Machine Weight: 11,561 lbs (5,255 kg) for 450 frame, 12,874 lbs (5,840 kg) for 630 frame

Injection Unit Specifications

Injection Capacity: Ranges from 5.8 oz (165 gms) to 13.2 oz (374 gms) depending on the model
Theoretical Displacement: Ranges from 10.6 in³ (173 cm³) to 24.0 in³ (393 cm³)
Maximum Injection Pressure: Up to 36,100 psi (2,492 bar)
Injection Rate: Up to 10.4 in³/sec (170 cm³/sec)
Screw Diameter: Ranges from 1.38 in (35 mm) to 1.97 in (50 mm)

Clamp Specifications

Clamping Force: 123 tons (1,100 kN)
Clamp Stroke: 13.8 in (350 mm)
Eject Force: 3.9 tons (35 kN)
Maximum Daylight: 32.7 in (830 mm)
Platen Size: 25.7 x 25.7 in (655 x 655 mm)

Notes

All specifications are subject to change and are for reference only. Consult a Milacron representative for detailed drawings and additional options.
Values are based on standard machine horsepower and voltage (460v/3ph/60Hz).

Catalog excerpts

MAGNA TOGGLE ENGLISH METRIC gal/min L/min FLI / FLA (Full Load Amps) Electrical Motor Main Circuit Breaker Machine Weight Water Supply (29°C Inlet Temp) Connected Load 2 TECHNICAL SPECIFICATIONS Injection Unit Specifications Injection Capacity, Maximum GPPS Maximum Injection Pressure 4165 Half Acre Rd., Batavia OH 45103 513.536.2000 [email protected] www.milacron.com Theoretical Displacement ©2017 Milacron LLC. All Rights Reserved. Pub Number: T4.1003.A.02.18 Injection Rate Injection Velocity in/sec mm/sec Screw Stroke Back Pressure Limits Screw Diameter Plasticizing Rate (GPPS) Screw Speed oz/sec gm/sec

Open the catalog to page 1

450 Frame ENGLISH METRIC Injection Unit Specifications (continued) Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Clamping Force Opening Force Clamp Stroke Clamp Close Velocity in/sec cm/sec Clamp Open Velocity in/sec cm/sec Eject Force (forward) Eject Velocity (forward) in/sec cm/sec Eject Velocity (retract) in/sec cm/sec Ejector Stroke Mold Protect Pressure Maximum Daylight Minimum Mold Height Maximum Mold Height Maximum Mold Weight Distance Between Tie Rods Dry Cycle Time (Euromap 6) Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference...

Open the catalog to page 2

MAGNA T125

MAGNA T125

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs