*mydirectindustry

Catalogs
MILACRON
THE LP500M SERIES

THE LP500M SERIES

Product catalog summary

Technical Specifications Overview

The document provides detailed technical specifications for the LPIM Series, specifically the LP500M-423 model, which is a low-pressure injection molding machine with a tonnage range of 500 to 2500 tons.

Clamp Specifications

Clamp Tonnage: 500 tons (454 tonnes)
Platen Size: 89 x 98 inches (2,261 x 2,489 mm)
Distance Between Tie Bars: 67.5 x 58.5 inches (1,715 x 1,486 mm)
Tie Bar Diameter: 7.5 inches (191 mm)
Max. Clamp Opening (Daylight): 120 inches (3,048 mm)
Clamp Stroke: 108 inches (2,743 mm)
Min. Mold Shut Height: 12 inches (305 mm)
Clamp Speed Max: 14 inches/sec (356 mm/sec)
Mold Carrying Capacity: 35,000 lbs (15,876 kg)

Extruder Specifications

Number of Extruders: 1
Screw Diameter: 4.5 inches (114 mm)
L/D Ratio: 30:1
Output HDPE or P.S.: 900 lbs/hr (408 kg/hr)
Drive Size: 250 Hp (186.4 kW)
Barrel Heating/Cooling Zones: 5
Barrel Cooling Type: Air Barrel Cooling

Injection Specifications

Number of Accumulators: 1
Total Shot Weight (PS/HDPE): 75/60 lbs (34/27 kg)
Accumulators Volume (Each): 2,300 in³ (37,690 cm³)
Total Shot Volume: 2,300 in³ (37,690 cm³)
Pressure Maximum (Per Accumulator): 6,000 psi (414 bar)
Total Number of Shot Sizes: 16
Independent Nozzle Sequence: 32

Nozzle Specifications

Multiple Nozzles: As Required
Nozzle Spacing: 6 x 6 inches (152 x 152 mm)
Number of Nozzle Locations: 180
Nozzle Heat Control Zones: 32
Manifold Extension Heat Control Zones: 20
Nozzle Hydraulic Controls: 32

Configuration and Power Consumption

Estimated Configuration Length: 60 ft (18.3 m)
Estimated Configuration Width: 12 ft (3.7 m)
Estimated Configuration Height (without air bags): 13 ft (3.9 m)
Estimated Configuration Weight: 113 tons (103 tonnes)
Estimated Power Consumption @ 85% Output: 360 kW/hr

Notes

All machine dimensions and specifications are subject to change. Values are for reference only. Consult the general assembly drawing from a Milacron representative for precise details.

Catalog excerpts

ONE MILACRON, INFINITE POSSIBILITIES TECHNICAL SPECIFICATIONS Melt Unit: 423 MULTI NOZZLE SERIES Not actual model, for visual reference only. ENGLISH METRIC Clamp tons tonnes Total Shot Weight (Shot Size) PS/HDPE Distance Between Tie Bars Accumulators Volume (Each) Max. Clamp Opening (Daylight) Clamp Stroke Min. Mold Shut Height in/sec mm/sec Multiple Nozzles Nozzle Spacing Clamp Tonnage Clamp Speed Max Mold Carrying Capacity (Moving Platen) Extruder Number of Extruders L/D Ratio Output HDPE or P.S. (total) Drive Size Total Shot Volume Pressure Maximum (Per Accum.) Total Number of Shot Sizes Independent Nozzle Sequence Number of Nozzle Locations Nozzle Heat Control Zones Screw Diamter Manifold Extension Heat Control Zones Nozzle Hydraulic Controls ENGLISH METRIC Est. Configuration Height (without air bags) tons tonnes Est. Power Consumption @ 85% Output Barrel Cooling Type Barrel Heating\Cooling Zones Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. A Please consult the general assembly drawing from a Milacron representative.

Open the catalog to page 1

THE LP500M SERIES

THE LP500M SERIES

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs