*mydirectindustry

Catalogs
MILACRON
THE LP1500MHP SERIES

THE LP1500MHP SERIES

1 / 1 PageView full catalog

THE LP1500MHP SERIES

Product catalog summary

Technical Specifications

Melt Unit and Tonnage: The LPIM Series features a melt unit with 2 x 630 tonnage, totaling 1500 tons (1361 tonnes).

Clamp Specifications: The clamp tonnage is 1500 tons, with a platen size of 161 x 107 inches (4089 x 2712 mm). The distance between tie bars is 125 x 69 inches (3175 x 1752 mm), and the tie bar diameter is 13 inches (330 mm). The maximum clamp opening is 120 inches (3048 mm), with a clamp stroke of 108 inches (2743 mm). The minimum mold shut height is 12 inches (305 mm), and the maximum clamp speed is 14 inches/sec (356 mm/sec). The mold carrying capacity is 50,000 lbs (22,688 kg).

Extruder Details: The machine includes 2 extruders with a screw diameter of 6 inches (152 mm) and an L/D ratio of 30:1. The output for HDPE or PS is 4800 lbs/hr (2180 kg/hr), with a drive size of 500 Hp (372.8 kW) for each extruder. There are 6 x 2 barrel heating/cooling zones, with air barrel cooling.

Injection Specifications: The machine has 2 accumulators with a total shot weight of 200 lbs for PS and 160 lbs for HDPE (91 kg/73 kg). Each accumulator has a volume of 3000 in³ (49,161 cm³), with a total shot volume of 6000 in³ (98,322 cm³). The maximum pressure per accumulator is 6000 psi (414 bar). There are 16 total shot sizes and 48 independent nozzle sequences.

Nozzle and Configuration: The machine supports multiple nozzles as required, with nozzle spacing of 6 x 6 inches (152 x 152 mm) and 266 nozzle locations. There are 48 nozzle heat control zones and 30 manifold extension heat control zones, with 48 nozzle hydraulic controls.

Estimated Configuration Dimensions: The estimated configuration length is 65 ft (19.8 m), width is 21 ft (6.4 m), and height (without airbags) is 16 ft (4.9 m). The estimated configuration weight is 250 tons (227 tonnes), with an estimated power consumption of 1000 kW/hr at 85% output.

Notes: All machine dimensions and specifications are subject to change and are for reference only. Consult a Milacron representative for general assembly drawings.

Catalog excerpts

ONE MILACRON, INFINITE POSSIBILITIES MULTI NOZZLE SERIES TECHNICAL SPECIFICATIONS Not actual model, for visual reference only. ENGLISH METRIC Clamp tons tonnes Total Shot Weight (Shot Size) PS/HDPE Distance Between Tie Bars Accumulators Volume (Each) Max. Clamp Opening (Daylight) Clamp Stroke Min. Mold Shut Height in/sec mm/sec Multiple Nozzles Nozzle Spacing Clamp Tonnage Clamp Speed Max Mold Carrying Capacity (Moving Platen w/ Way Supports) Extruder Number of Extruders L/D Ratio Output HDPE or P.S. (total) Drive Size Total Shot Volume Pressure Maximum (Per Accum.) Total Number of Shot Sizes Independent Nozzle Sequence Number of Nozzle Locations Nozzle Heat Control Zones Screw Diamter Manifold Extension Heat Control Zones Nozzle Hydraulic Controls Est. Configuration Height (without air bags) tons tonnes Est. Power Consumption @ 85% Output Barrel Cooling Type Barrel Heating\Cooling Zones Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. A Please consult the general assembly drawing from a Milacron representative.

Open the catalog to page 1

THE LP1500MHP SERIES

THE LP1500MHP SERIES

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs