• Melt Unit: 660 Tonnage: 1000
• Clamp:
  • Clamp Tonnage: 1,000 tons (907 tonnes)
  • Platen Size: 167 x 103 in (4,242 x 2,616 mm)
  • Distance Between Tie Bars: 137 x 44 in (3,480 x 1,118 mm)
  • Tie Bar Diameter: 11 in (279 mm)
  • Max. Clamp Opening (Daylight): 120 in (3,048 mm)
  • Clamp Stroke: 108 in (2,743 mm)
  • Min. Mold Shut Height: 12 in (305 mm)
  • Clamp Speed Max: 14 in/sec (356 mm/sec)
  • Mold Carrying Capacity: 35,000 lbs (15,876 kg)
• Extruder:
  • Number of Extruders: 1
  • Screw Diameter: 6 in (152 mm)
  • L/D Ratio: 30:1
  • Output HDPE or P.S.: 2,400 lbs/hr (1,090 kg/hr)
  • Drive Size: 500 Hp (372.8 kW)
  • Barrel Heating/Cooling Zones: 6
  • Barrel Cooling Type: Air Barrel Cooling

• Injection:
  • Number of Accumulators: 2
  • Total Shot Weight (PS/HDPE): 200/160 lbs (91/73 kg)
  • Accumulators Volume (Each): 3,000 in³ (49,161 cm³)
  • Total Shot Volume: 6,000 in³ (98,322 cm³)
  • Pressure Maximum (Per Accumulator): 6,000 psi (414 bar)
  • Total Number of Shot Sizes: 16
  • Independent Nozzle Sequence: 32
• Nozzle:
  • Multiple Nozzles As Required
  • Nozzle Spacing: 6 x 6 in (152 x 152 mm)
  • Number of Nozzle Locations: 256
  • Nozzle Heat Control Zones: 32
  • Manifold Extension Heat Control Zones: 20
  • Nozzle Hydraulic Controls: 32

• Length: 62 ft (18.9 m)
• Width: 16 ft (4.9 m)
• Height (without air bags): 14 ft (4.26 m)
• Weight: 160 tons (145 tonnes)
• Power Consumption @ 85% Output: 450 kW/hr

Note: All machine dimensions and specifications are subject to change. Values are for reference only. Consult a Milacron representative for detailed assembly drawings.