*mydirectindustry

Catalogs
MILACRON
LP1000MWP-630

LP1000MWP-630

Product catalog summary

Technical Specifications Overview
The document provides detailed technical specifications for the LPIM Series (500-2500 Ton) injection molding machines, specifically focusing on the LP1000MWP-630 model. The specifications are presented in both English and Metric units.

Clamp Specifications

Clamp Tonnage: 1,000 tons (907 tonnes)
Platen Size: 167 x 103 inches (4,242 x 2,616 mm)
Distance Between Tie Bars: 137 x 44 inches (3,480 x 1,118 mm)
Tie Bar Diameter: 11 inches (279 mm)
Max. Clamp Opening (Daylight): 120 inches (3,048 mm)
Clamp Stroke: 108 inches (2,743 mm)
Min. Mold Shut Height: 12 inches (305 mm)
Clamp Speed Max: 14 in/sec (356 mm/sec)
Mold Carrying Capacity: 35,000 lbs (15,876 kg)

Extruder Specifications

Number of Extruders: 2
Screw Diameter: 6 inches (152 mm)
L/D Ratio: 30:1
Output HDPE or P.S.: 4,800 lbs/hr (2,180 kg/hr)
Drive Size: 500 Hp x 2 (372.8 kW x 2)
Barrel Heating/Cooling Zones: 6 x 2
Barrel Cooling Type: Air Barrel Cooling

Injection Specifications

Number of Accumulators: 2
Total Shot Weight (PS/HDPE): 200/160 lbs (91/73 kg)
Accumulators Volume (Each): 3,000 in³ (49,161 cm³)
Total Shot Volume: 6,000 in³ (98,322 cm³)
Pressure Maximum (Per Accumulator): 6,000 psi (414 bar)
Total Number of Shot Sizes: 16
Independent Nozzle Sequence: 32

Nozzle Specifications

Multiple Nozzles: As Required
Nozzle Spacing: 6 x 6 inches (152 x 152 mm)
Number of Nozzle Locations: 256
Nozzle Heat Control Zones: 32
Manifold Extension Heat Control Zones: 20
Nozzle Hydraulic Controls: 32

General Notes

All machine dimensions and specifications are subject to change and are for reference only.
Consult the general assembly drawing from a Milacron representative for precise details.

Configuration and Power Consumption

Estimated Configuration Length: 62 ft (18.9 m)
Estimated Configuration Width: 22 ft (6.7 m)
Estimated Configuration Height (without air bags): 13 ft (3.9 m)
Estimated Configuration Weight: 185 tons (167 tonnes)
Estimated Power Consumption @ 85% Output: 950 kW/hr

Catalog excerpts

ONE MILACRON, INFINITE POSSIBILITIES MULTI NOZZLE SERIES TECHNICAL SPECIFICATIONS Not actual model, for visual reference only. ENGLISH METRIC Clamp tons tonnes Total Shot Weight (Shot Size) PS/HDPE Distance Between Tie Bars Accumulators Volume (Each) Max. Clamp Opening (Daylight) Clamp Stroke Min. Mold Shut Height in/sec mm/sec Multiple Nozzles Nozzle Spacing Clamp Tonnage Clamp Speed Max Mold Carrying Capacity (Moving Platen) Extruder Number of Extruders Drive Size Pressure Maximum (Per Accum.) Total Number of Shot Sizes Independent Nozzle Sequence Number of Nozzle Locations Manifold Extension Heat Control Zones Nozzle Hydraulic Controls L/D Ratio Output HDPE or P.S. (total) Total Shot Volume Nozzle Heat Control Zones Screw Diamter Est. Configuration Height (without air bags) tons tonnes Est. Power Consumption @ 85% Output Barrel Cooling Type Barrel Heating\Cooling Zones Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. A Please consult the general assembly drawing from a Milacron representative.

Open the catalog to page 1

LP1000MWP-630

LP1000MWP-630

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs