*mydirectindustry

Catalogs
MILACRON
THE LP1000MSWP SERIES

THE LP1000MSWP SERIES

1 / 1 PageView full catalog

THE LP1000MSWP SERIES

Product catalog summary

Technical Specifications

Melt Unit and Tonnage: The LPIM Series features a melt unit with 2 x 630 tonnage, totaling 1000 tons (907 tonnes).

Clamp Specifications: The clamp tonnage is 1000 tons, with a platen size of 186 x 103 inches (4,724 x 2,616 mm). The distance between tie bars is 144 x 60 inches (3,658 x 1,524 mm), and the tie bar diameter is 11 inches (279 mm). The maximum clamp opening is 120 inches (3,048 mm), with a clamp stroke of 108 inches (2,743 mm). The minimum mold shut height is 12 inches (305 mm), and the maximum clamp speed is 14 inches/sec (356 mm/sec). The mold carrying capacity on the moving platen is 35,000 lbs (15,876 kg).

Extruder Details: The machine includes 2 extruders with a screw diameter of 6 inches (152 mm) and an L/D ratio of 30:1. The output for HDPE or P.S. is 4,800 lbs/hr (2,180 kg/hr). The drive size is 500 Hp x 2 (372.8 kW x 2), with 6 x 2 barrel heating/cooling zones and air barrel cooling.

Injection Specifications: The machine has 2 accumulators with a total shot weight of 200 lbs for PS and 160 lbs for HDPE (91 kg/73 kg). Each accumulator has a volume of 3,000 in³ (49,161 cm³), with a total shot volume of 6,000 in³ (98,322 cm³). The maximum pressure per accumulator is 6,000 psi (414 bar). There are 16 total shot sizes and 32 independent nozzle sequences.

Nozzle Details: The machine features multiple nozzles as required, with nozzle spacing of 6 x 6 inches (152 x 152 mm). There are 218 nozzle locations, 32 nozzle heat control zones, 20 manifold extension heat control zones, and 32 nozzle hydraulic controls.

Configuration and Power Consumption: The estimated configuration length is 62 ft (18.9 m), width is 22 ft (6.7 m), and height (without airbags) is 13 ft (3.9 m). The estimated configuration weight is 215 tons (195 tonnes), with an estimated power consumption of 760 kW/hr at 85% output.

Notes: All machine dimensions and specifications are subject to change and are for reference only. Consult a Milacron representative for general assembly drawings.

Catalog excerpts

ONE MILACRON, INFINITE POSSIBILITIES MULTI NOZZLE SERIES TECHNICAL SPECIFICATIONS Not actual model, for visual reference only. ENGLISH METRIC Clamp tons tonnes Total Shot Weight (Shot Size) PS/HDPE Distance Between Tie Bars Accumulators Volume (Each) Max. Clamp Opening (Daylight) Clamp Stroke Min. Mold Shut Height in/sec mm/sec Multiple Nozzles Nozzle Spacing Clamp Tonnage Clamp Speed Max Mold Carrying Capacity (Moving Platen) Extruder Number of Extruders Drive Size Pressure Maximum (Per Accum.) Total Number of Shot Sizes Independent Nozzle Sequence Number of Nozzle Locations Manifold Extension Heat Control Zones Nozzle Hydraulic Controls L/D Ratio Output HDPE or P.S. (total) Total Shot Volume Nozzle Heat Control Zones Screw Diamter Est. Configuration Height (without air bags) tons tonnes Est. Power Consumption @ 85% Output Barrel Cooling Type Barrel Heating\Cooling Zones Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. A Please consult the general assembly drawing from a Milacron representative.

Open the catalog to page 1

THE LP1000MSWP SERIES

THE LP1000MSWP SERIES

Catalog excerpts

All MILACRON catalogs and technical brochures

Archived catalogs