THE CINCINNATI SERIES TONNAGE: 2600 US/2300 Metric

Product catalog summary

Technical Specifications Overview

The document provides detailed technical specifications for the Cincinnati Series injection molding machines, ranging from 1500 to 6750 tons. It includes information on frame sizes, injection unit specifications, and clamp details.

Frame Sizes and Tonnage

The Cincinnati Series is available in three frame sizes: 16000, 23000, and 34000, with corresponding tonnage capacities. These are not actual models but serve as visual references.

Injection Unit Specifications

Injection Capacity: Varies across frames, with maximum GPPS capacity ranging from 6,330 gms to 21,791 gms.
Screw Diameter: Ranges from 110 mm to 180 mm, depending on the frame size.
L/D Ratio: Varies slightly across frames, with values around 20.0 to 25.9.
Maximum Injection Pressure: Ranges from 21,000 psi to 34,000 psi.
Injection Rate and Velocity: Provided for Standard, Increased, and Performance packages, with rates and velocities increasing with package level.

Clamp Specifications

Clamping Force: 2,585 tons (23,000 kN).
Clamp Stroke: 3,000 mm.
Clamp Speed: Varies with package, with maximum close velocity at 1,150 mm/sec.
Ejector Force and Stroke: 45 tons (400 kN) and 400 mm, respectively.

Machine Dimensions and Weight

Dimensions: Vary by frame size, with the largest being 610 x 187 x 149 inches.
Weight: Ranges from 238,730 lbs to 266,988 lbs without oil.

Hydraulic and Electrical Systems

Hydraulic System Pressure: 3,335 psi (230 bar).
Electric Motor Power: Varies by package, from 165 kW to 220 kW.
Total Oil Reservoir Capacity: Ranges from 1,743 L to 3,104 L.

Additional Notes

All specifications are subject to change and should be verified with a Milacron representative.
Values provided are for reference and may not reflect actual machine performance.

Catalog excerpts

THE CINCINNATI SERIES TONNAGE: 2600 US/2300 Metric-1

ONE MILACRON, INFINITE POSSIBILITIES Available Packages: Standard (STD) Increased (INCR) Performance (PERF) 16000 Frame ENGLISH METRIC TECHNICAL SPECIFICATIONS Not actual model, for visual reference only. 16000 Frame ENGLISH METRIC Injection Unit Specifications Clamping Force Clamp Opening Force (Max) Clamp Stroke Clamp Speed Close Velocity (STD/INCR./PERF.) in/sec mm/sec Clamp Speed Open Velocity (STD/INCR./PERF.) in/sec mm/sec Ejector Force Maximum Ejector Stroke Mold Protect Pressure Maximum Daylight Min/Max Mold Thickness Maximum Mold Weight Distance Between Tie Rods (H x V) Dry Cycle Time (Euromap 6) (STD/INCR./PERF.)* Diagonal Tiebar Distance Mold Locating Ring Screw Speed Maximum (INCR. PKG)- 191 kW Screw Speed Maximum (PERF. PKG)- 220 kW Machine Dimensions (L × W × H) (without stairs) Machine Weight (without oil) Injection Capacity, Maximum GPPS Screw Diameter Theoretical Displacement Maximum Injection Pressure in/sec mm/sec Injection Rate (INCR. PKG)- 191 kW Injection Velocity (INCR. PKG)- 191 kW in/sec mm/sec Injection Rate (PERF. PKG)- 220 kW Injection Vleocity (PERF. PKG)- 220 kW in/sec mm/sec Screw Stroke Back Pressure Limit Screw Speed Maximum (STD PKG)- 165 kW Core Pull (STD/INCR./PERF.) Hydraulic System Pressure gal/min L/min Calculated Recovery Rate (GP Styrene) (STD PKG)- 165 kW oz/sec gm/sec Calculated Recovery Rate (GP Styrene) (INCR. PKG)- 191 kW oz/sec gm/sec Connected Load (FLI) (STD PACK.)- 107kW Calculated Recovery Rate (GP Styrene) (PERF. PKG)- 220 kW oz/sec gm/sec Total Oil Reservoir Capacity Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Nozzle Holding Force Electric Motor (STD/INCR./PERF.) Heat Exchanger Water @ 90°F gal/min L/min Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. Please A consult the general assembly drawing from a Milacron representative. 2) All specifications reference the Standard performance level (STD) unless otherwise noted. 3) *Theoretical calculated dry cy

Open the catalog to page 1