THE CINCINNATI SERIES TONNAGE: 2250 US/2000 Metric

Product catalog summary

Technical Specifications Overview

The document provides detailed technical specifications for the Cincinnati Series injection molding machines, ranging from 1500 to 6750 tons. It includes information on frame sizes, injection unit specifications, and clamping mechanisms.

Frame Sizes and Tonnage

The Cincinnati Series is available in three frame sizes: 10100, 16000, and 23000, with tonnage capacities of 2250 US/2000 Metric. These frames are not actual models but serve as visual references.

Injection Unit Specifications

Injection Capacity: Ranges from 148 oz (4,185 gms) to 540 oz (15,305 gms) depending on the frame size.
Screw Diameter: Varies from 3.94 in (100 mm) to 6.30 in (160 mm).
L/D Ratio: Ranges from 20.0 to 25.8.
Theoretical Displacement: From 268 in³ (4,398 cm³) to 981 in³ (16,084 cm³).
Maximum Injection Pressure: Between 21,000 psi (1,448 bar) and 34,000 psi (2,345 bar).
Injection Rate and Velocity: Varies across standard, increased, and performance packages, with rates up to 111.1 in³/sec (1820 cm³/sec) and velocities up to 5.8 in/sec (147 mm/sec).

Clamping Specifications

Clamping Force: 2,248 tons (20,000 kN).
Clamp Stroke: 118.1 in (3,000 mm).
Clamp Speed: Close velocity ranges from 30.2 to 35.9 in/sec (767 to 911 mm/sec), and open velocity from 32.5 to 38.6 in/sec (825 to 980 mm/sec).
Ejector Force: 45 tons (400 kN) with a maximum stroke of 15.7 in (400 mm).

General Machine Specifications

Machine Dimensions: Length ranges from 511 in (12,967 mm) to 547 in (13,887 mm), width 182 in (4,629 mm), and height 147 in (3,725 mm).
Machine Weight: Varies from 220,718 lbs (100,117 kg) to 237,421 lbs (107,693 kg).
Hydraulic System Pressure: 3,335 psi (230 bar).
Core Pull Capacity: Up to 65 gal/min (246 L/min) in increased and performance packages.

Additional Notes

All machine dimensions and specifications are subject to change and should be verified with a Milacron representative.
Specifications reference the standard performance level unless otherwise noted.
Theoretical dry cycle times are provided for reference.

Catalog excerpts

THE CINCINNATI SERIES TONNAGE: 2250 US/2000 Metric-1

ONE MILACRON, INFINITE POSSIBILITIES Available Packages: Standard (STD) Increased (INCR) Performance (PERF) 10100 Frame ENGLISH METRIC TECHNICAL SPECIFICATIONS Not actual model, for visual reference only. 10100 Frame ENGLISH METRIC Injection Unit Specifications Clamping Force Clamp Opening Force (Max) Clamp Stroke Clamp Speed Close Velocity (STD/INCR./PERF.) in/sec mm/sec Clamp Speed Open Velocity (STD/INCR./PERF.) in/sec mm/sec Ejector Force Maximum Ejector Stroke Mold Protect Pressure Maximum Daylight Min/Max Mold Thickness Maximum Mold Weight 50% per platen Distance Between Tie Rods (H x V) Dry Cycle Time (Euromap 6) (STD/INCR./PERF.)* Diagonal Tiebar Distance Mold Locating Ring Machine Dimensions (L × W × H) (without stairs) Machine Weight (without oil) Hydraulic System Pressure Core Pull (STD/INCR./PERF.) gal/min L/min Injection Capacity, Maximum GPPS Screw Diameter Theoretical Displacement Maximum Injection Pressure in/sec mm/sec Injection Rate (INCR. PKG)- 165 kW Injection Velocity (INCR. PKG)- 165kW in/sec mm/sec Injection Rate (PERF. PKG)- 191 kW Injection Vleocity (PERF. PKG)-191 5kW in/sec mm/sec Screw Stroke Back Pressure Limit Screw Speed Maximum (STD PKG)- 136 kW Screw Speed Maximum (INCR. PKG)- 16536 kW Screw Speed Maximum (PERF. PKG)- 191 kW Calculated Recovery Rate (GP Styrene) (STD PKG)- 136 kW oz/sec gm/sec Calculated Recovery Rate (GP Styrene) (INCR. PKG)- 165 kW oz/sec gm/sec Connected Load (FLI) (STD PACK.)- 107kW Calculated Recovery Rate (GP Styrene) (PERF. PKG)- 191 kW oz/sec gm/sec Total Oil Reservoir Capacity Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Nozzle Holding Force Electric Motor (STD/INCR./PERF.) Heat Exchanger Water @ 90°F gal/min L/min Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. Please A consult the general assembly drawing from a Milacron representative. 2) All specifications reference the Standard performance level (STD) unless otherwise noted. 3) *Theoretical calculated dry cy

Open the catalog to page 1