THE CINCINNATI SERIES TONNAGE: 1500 US/1300 Metric

Product catalog summary

Technical Specifications Overview

The document provides detailed technical specifications for the Cincinnati Series injection molding machines, ranging from 1500 to 6750 tons. It includes information on frame sizes, injection unit specifications, and clamping mechanisms.

Frame Sizes and Tonnage

The Cincinnati Series is available in three frame sizes: 10100, 16000, and 23000. The tonnage is not specified for actual models but is provided for visual reference.

Injection Unit Specifications

Injection Capacity: Ranges from 148 oz (4,185 gms) to 540 oz (15,305 gms) depending on the frame size.
Screw Diameter: Varies from 3.94 inches (100 mm) to 6.30 inches (160 mm).
L/D Ratio: Ranges from 20.0 to 25.8.
Theoretical Displacement: From 268 in³ (4,398 cm³) to 981 in³ (16,084 cm³).
Maximum Injection Pressure: Between 21,000 psi (1,448 bar) and 34,000 psi (2,345 bar).
Injection Rate and Velocity: Varies across standard, increased, and performance packages, with maximum rates reaching up to 95.3 in³/sec (1,562 cm³/sec) and velocities up to 5.0 in/sec (127 mm/sec).

Clamping Specifications

Clamping Force: 1461 tons (13,000 kN).
Clamp Stroke: 88.6 inches (2,250 mm).
Clamp Speed: Close and open velocities vary across packages, with maximum speeds of 50.0 in/sec (1,270 mm/sec).
Ejector Force: 28.1 tons (250 kN) with a maximum stroke of 11.8 inches (300 mm).
Mold Specifications: Maximum daylight of 116.1 inches (2,950 mm) and mold thickness ranging from 27.5 inches (700 mm) to 61.4 inches (1,560 mm).

General Machine Specifications

Machine Dimensions: Vary slightly between models, with lengths up to 506 inches (12,852 mm).
Machine Weight: Ranges from 132,200 lbs (59,965 kg) to 148,394 lbs (67,311 kg).
Hydraulic System Pressure: 3,335 psi (230 bar).
Core Pull and Electric Motor: Core pull rates and motor power vary across packages, with maximum core pull of 65 gal/min (246 L/min) and motor power up to 165 kW.

Additional Notes

All specifications are subject to change and should be verified with a Milacron representative.
Values provided are for reference and may not represent actual models.

Catalog excerpts

THE CINCINNATI SERIES TONNAGE: 1500 US/1300 Metric-1

ONE MILACRON, INFINITE POSSIBILITIES Available Packages: Standard (STD) Increased (INCR) Performance (PERF) 10100 Frame ENGLISH METRIC TECHNICAL SPECIFICATIONS Not actual model, for visual reference only. 10100 Frame ENGLISH METRIC Injection Unit Specifications Clamping Force Clamp Opening Force (Max) Clamp Stroke Clamp Speed Close Velocity (STD/INCR./PERF.) in/sec mm/sec Clamp Speed Open Velocity (STD/INCR./PERF.) in/sec mm/sec Ejector Force Maximum Ejector Stroke Mold Protect Pressure Maximum Daylight Min/Max Mold Thickness Maximum Mold Weight 50% per platen Distance Between Tie Rods (H x V) Dry Cycle Time (Euromap 6) (STD/INCR./PERF.)* Diagonal Tiebar Distance Mold Locating Ring Screw Speed Maximum (INCR. PKG) - 136 kW Screw Speed Maximum (PERF. PKG) - 165 kW Machine Dimensions (L × W × H) (without stairs) Machine Weight (without oil) Hydraulic System Pressure Core Pull (STD/INCR./PERF.) gal/min L/min Injection Capacity, Maximum GPPS Screw Diameter Theoretical Displacement Maximum Injection Pressure in/sec mm/sec Injection Rate (INCR. PKG)- 136 kW Injection Velocity (INCR. PKG)- 136 kW in/sec mm/sec Injection Rate (PERF. PKG)- 165 kW Injection Vleocity (PERF. PKG)- 165 kW in/sec mm/sec Screw Stroke Back Pressure Limit Screw Speed Maximum (STD PKG) - 107 kW Calculated Recovery Rate (GP Styrene) (STD PKG) - 107 kW oz/sec gm/sec Calculated Recovery Rate (GP Styrene) (INCR. PKG) - 136 kW oz/sec gm/sec Calculated Recovery Rate (GP Styrene) (PERF. PKG) - 165 kW oz/sec gm/sec Total Oil Reservoir Capacity Number of Pyrometers (Barrel/Nozzle) Total Heat Capacity Nozzle Holding Force Electric Motor (STD/INCR./PERF.) Heat Exchanger Water @ 90°F gal/min L/min Notes 1) ll machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. Please A consult the general assembly drawing from a Milacron representative. 2) All specifications reference the Standard performance level (STD) unless otherwise noted. 3) *Theoretical calculated dry cy

Open the catalog to page 1