ROBOSHOT Alpha series

Product catalog summary

Technical Specifications Overview

This document provides detailed technical specifications for the Milacron Alpha Series Roboshot 500, focusing on various screw diameters ranging from 68 to 100 mm. The specifications are presented in both English and Metric units.

General Specifications

Overall Dimensions: The machine's dimensions vary slightly with screw diameter, with a length of approximately 365.5 to 373.3 inches (9,283 to 9,483 mm), a width of 88.3 inches (2,244 mm), and a height of 90.4 inches (2,295 mm).
Machine Weight: The machine weighs approximately 65,477 lbs (29,700 kg).
Power Requirements: Operates on a 3 Phase, 220V +/-10%, 60 Hz +/- 1 Hz power source, with a machine breaker size of 250 Amps and a total capacity of 170 kva.

Injection Unit Specifications

Injection Capacity: Ranges from 31.4 oz (890 gms) to 94.0 oz (2,665 gms) depending on the screw diameter.
Theoretical Displacement: Varies from 57.6 in³ (944 cm³) to 172.5 in³ (2,827 cm³).
Maximum Injection Pressure: Ranges from 23,206 psi (1,600 bar) to 40,611 psi (2,800 bar).
Screw Specifications: Includes a screw stroke of 10.24 to 14.17 inches (260 to 360 mm) and a screw speed max of 200 min-1.

Clamp Standard Specifications

Clamping Force: Standard clamping force is 495 tons (4500 kN), with an option for 550 tons (5,000 kN).
Mold Specifications: Mold opening stroke is 35.43 inches (900 mm), with a maximum daylight of 74.8 inches (1,900 mm) and a mold thickness range of 13.8 to 39.4 inches (350 to 1000 mm).
Ejector Specifications: Ejector force is 16.5 tons (150 kN) with a stroke max of 9.84 inches (250 mm).

Additional Notes

All machine dimensions and specifications are subject to change and are for reference only.
The maximum injection pressure and pack pressure are theoretical values and may be limited by molding conditions.
Smaller molds than specified may limit the clamp force.

Catalog excerpts

Open the catalog to page 1

|Zf MILACRON* ROBOSHOT ALPHA SERIES TECHNICAL SPECIFICATIONS Notes - All machine dimensions and specifications are subject to change. Values are for reference only. All general assembly drawings or visuals included herein are for reference only. Please consult the general assembly drawing from a Milacron representative. *1) Smaller mold than this size may limit the clamp force *2) The maximum injection pressure and maximum pack pressure is not melt pressure but injection unit output. The maximum injection pressure and maximum pack pressure is the maximum value that can be set. The maximum injection...

Open the catalog to page 2

All Milacron China catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list