CINCINNATI MILACRON *Note: Increased injection velocity option will improve injection rates **Note: Increased L/d options available ***Note: Increased extruder rpm options available ****Note: All machine dimensions and specifications are subject to change. Values are for reference only.

Technical Specifications 1650 Hybid Frame* Injection Unit Specifications Injection Capacity, Max GPPS* Theoretical Disp Injection Stroke Screw Diameter Injection Performance Extruder L/d Ratio ** Extruder Performance *** Barrel Heat No. of Pyrometers (barrel/nozzle) Total Heat Capacity Sled Pull in Force Clamp Specifications Tonnage Maximum Daylight Max/Min Mold Height Euromap Dry Cycle Time Platen Size Ejector Stroke Machine Specifications*** Length, see note Centerline Height Shipping Weight (machine) Electrical Specifications*** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Power Supply Capacity...

CINCINNATI MILACRON Barrel Heat Clamp Specifications Machine Specifications*** Length, see note Electrical Specifications**** Input Power Source 460 VAC ± 10% 3 Ph 60 Hz Machine Requirements Water *Note: Other capacities available. Please Consult Factory. **Note: Higher eject force and speed available. Please Consult Factory. ***Note: All machine dimensions and specifications are subject to change. Values are for reference only.

Barrel Heat Clamp Specifications Tonnage Machine Specifications**** Length, see note Electrical Specifications**** Machine Requirements Water *Note: 90 oz shot size with 16,500 psi C barrel is also available on this injection unit frame. **Note: Increased eject speed and force options available (consult factory) ***Note: 120mm extruder also available. Please Consult Factory for details. ****Note: All machine dimensions and specifications are subject to change. Values are for reference only.

CINCINNATI MILACRON Barrel Heat Clamp Specifications Tonnage Machine Specifications*** Electrical Specifications*** Machine Requirements Water *Note: 120mm 25:1 L/d extruder also available (consult factory) **Note: Higher eject force and speed available (consult factory) ***Note: All machine dimensions and specifications are subject to change. Values are for reference only.

Top View 410 330 [16.1] [13.0] INSIDE STAT PLATEN GATES THICKNESS 728 857 [28.6] [33] INSIDE OUTSIDE GATES GATES 1962 [77.3] ELECTRICAL CABINET DOOR SWIVEL 135 1615 [5.3] [63.6] STRAIN CONTROL ROD SWIVEL 5018.6 [197.58] CLAMP SHIPPING LENGTH 1400 GATE STROKE 675 [26.6] CLAMP STROKE 2529 [99.6] FOR EXTRUDER SCREW REMOVAL 514 [20.2] PART DROP W/O GUARD 886 [34.9] PART DROP 1188 [46.8] 1324 [52.1] TOP OF LOWER STRAIN ROD C.L. OF CONTROL SCREEN 9371.7 [368.96] OVERALL LENGTH INCLUDING SLED TRAVEL Front View FEEDTHROAT HEIGHT

78 [ 3.1 ] GATE HANDLE 39 [ 1.5 ] 2163 [ 85.1 ] TOP OF STRAIN ROD -INCH0.750-10 UNC-2B, 1.44 DP (12X) SPI ROBOT MOUNTING HOLES PATTERN #5 Feed Throat Robot Mounting Feed throat dimensions can change based on injection frame. Consult factory for specific details.

HOLE DESCRIPTION “A” Ø0.750-10 UNC-2B, 1.44” DP (108 X) EACH PLATEN “B” Ø27.0 THRU (12X) CORRESPONDING HOLES IN K/O BAR Ø0.562”, THRU “C” Ø27.0 THRU (1x) CORRESPONDING HOLE IN K/O BAR Ø0.500-13 UNC-2B, THRU “D” Ø52.4 THRU (8X) CORRESPONDING HOLES IN K/O BAR Ø0.562”, THRU "A" MOVING AND STATIONARY PLATEN 127.0 177.8 VIEW OF MOVING PLATEN FACE SCALE 0.200 Die Space 288.0 TO K/O BAR FACE AT MAX EJECT STROKE 125 1113.5 STANDARD ELECTRIC EJECT 602.5 ROBOT MOUNTING FACE 840.0 BETWEEN STRAIN RODS +0.05 101.60 0 DIE LOCATING RING I.D. 585.0 STATIONARY PLATEN MOVING PLATEN 675.0 CLAMP STROKE 500.0 MOLD...