Our bacterial filters are made up of an opaque pot/filter (1) in which a cartridge for bacteria (2) equipped with a baffle (3) is installed. Filter opacity prevents bacterial The cartridge is covered by the baffle which captures liquid and solid heavy particles. Gravity makes these particles fall to the bottom of the filter. A sterilisable Pyrex® jar (4) is mounted under the filter in order The cartridge is made up of borosi- Licate microfibres and its filtration rating prevents bacteria and living It meets the sodium flame test which guarantees penetration efficiency ticles. This cartridge media is pleated in order to guarantee a maximum exchange area for a longer service life and an unequalled pressure drop. | Schedule for capacity corrections for a network at -650 mbar relative Simple filtration without by-pass. • Twin pot with bacterial filter • Wall fixation Specifications are subject to be changed without notice

vacuum protection drip pots Simple filtration with by-pass_ • Twin pot with bacterial filter •2 three-way valves with welding sleeve on inlet • By-pass tube • Wall fixation Parallel duplex filtration. • 2 assemblies pot/bacterial filter, parallel mounting with 2 three-way valves on inlet and outlet • Wall fixation Specifications are subject to be changed without notice

Simple filtration without by-pass, simple filtration with by-pass and parallel duplex titrations_ Filtration reference MIND : foreseen 2 cartridges for duplex filtrations Lowest level drip pot for vacuum network Fitted pot to the flow rate to be connected at the lowest point of the collector Water/air separator for LABOVAC plants. • Water/air separator fitted to the air flow rate of the liquid ring vacuum pump • Setting at the pump exhaust Drain trap with visible level alone. • Liquid drain trap for vacuum pump protection Sterilizable lowest level drip pot • Thermal glass pot for network protection...