iCoat-320Coating Thickness Gauge Contact us Mikrosize Precision Instrument Co.,Ltd A-4035 RuiFeng Business Expo, Wuhu City, China , 241000. Web: www.mikrosize.coin Email: [email protected] Web:www.mikrosize.com Email:[email protected]

Product Features • Employs both magnetic and eddy current thickness measurement methods, allowing for the measurement of non-magnetic coating thickness on magnetic metal substrates as well as non-conductive coating thickness on non-magnetic metal substrates. • Offers two measurement modes: Continuous (CONTINUE) and Single (SINGLE) • Provides two operation modes: Direct (DIRECT) and Group (APPL1-5) • Includes five statistical parameters: Mean (MEAN), Maximum (MAX), Minimum (MIN), Number of Tests (NO.), and Standard Deviation (S.DEV) • Capable of calibration using both single-point and two-point...

1.Data Display 2.Measurement Mode 4.Battery Level Display 5.Measurement Unit 7.Storage Record Technical Indicator 3.Probe Type Indicator 6.Working Mode The boundary can only be set in the group working mode. The screen is clear and the interface layout is reasonable, so users can quickly find the information they need.

l.Connection cable 2.Loading sleeve 3.Positioning sleeve

Date Statistic Calculate the total number, Average, Maximum, Minimum, And Standard Deviation Of Statistical Samples Two measurement modes can be selected •Single (Single Measurement): The probe will display one measurement result with a beep sound each time it touches the tested object • Continue (Continuous Measurement): Measure dynamically without lifting the probe. There will be no beep sound during the measurement process, and the measurement results will flash on the screen. Two working modes can be selected • DIRECT (direct mode): This mode is used for casual measurement, and the measured...

Setting Interface Measuring Unit μm (metric system) / mils (imperial system) View Data File View recorded data under corresponding grouping mode Delete File Delete grouped measurement files LCD Brightness Press the "Up" or "Down" button to adjust the brightness of the display screen.

Setting Interface Key Sound Choose "ON" or "OFF" to enable or disable the sound of the buttons. Language Choose between "Chinese" or "English" for language selection. About Software This interface allows you to view the software version.

User-friendly Key Sound The instrument is equipped with a strap for convenient one-handed use by users and to prevent it from falling. Language The back of the instrument is provided with button indications, facilitating users to view the instrument's button operation instructions. About Software There are red eye-catching marks on the interface direction to guide users to connect the cable correctly.

Steps of Use • Check if the battery is fully charged to prevent insufficient power from affecting the measurement results during the process. • Wipe the sensor head with a soft cloth or tissue to ensure it is free from dust, oil, and other impurities, thus guaranteeing the accuracy of the measurement. • After turning on the instrument, perform calibration as needed. Calibration ensures the accuracy of measurement results. • Determine the specific location where the coating thickness needs to be measured based on your requirements. • Clean the measurement area with an appropriate cleanser or cloth...

Probe Model Operating Principle Substrate Material Coating Material Operating Environment Power Supply Temperature: 0°C~40°C Humidity: 20%~90%RH No strong magnetic field 2x1.5V AA (Size 5) 125mmx70mmx31mm About 400g Note: H-Nominal value

Optional Delivery F1 (Iron-Based Probe) F10 (Large Range Probe)