The high volume professional

Mikron Multistar LX-24 For quantity with quality! The transfer system Multistar LX is a processing system for manufacturing small precision parts in large quantities. Versions with 24 work stations are available. What makes the Multistar LX so special? It’s the fast, nimble and precise performance and its simple and functional construction, which make the Multistar LX your reliable partner. Ideally, but not a necessity, is an output of at least a million parts per year. Another advantage is the price performance ratio, which makes the Multistar an investment with added value. As fast as it gets!...

Processing with guiding bush Multistar LX-24: It’s a professional, isn’t it? The Multistar LX-24 with 24 work stations and up to 44 working spindles is the guarantor for a smooth mass production. With the Multistar LX-24 machining is possible from below and above or from the side, for example when separating, drilling, turning or thread cutting. Other additional features are the 24 intermediate stations, which allow measuring, controlling and cleaning procedures during the same run. That way you can quadruplicate your productivity It is unique! A run produces up to 600 simple workpieces per minute....

Mikron Multistar LX-24 Typical applications Typical Multistar LX workpieces

CASE HISTORY Bicycle Nipples On Mikron Multistar LX-24 S N LES CTIO U OD TS PR COS The challenge - Produce bicycle nipples ø 4mm, lenght 12mm, thread lenght 8mm - Annual production volume approx. 100 mio nipples - Material: Brass Mikron: The innovative solution Required machines: 1 Mikron Multistar LX-24 Necessary statistic control: 4 Necessary statistic control: 1 for constant quality Employees: 1 every 4 machines - Raw material: starting from pressed blanks * Traditional transefer machines - Raw material: starting from pressed blanks Your advantage Production area Setup time

Technical data Multistar LX-24 Machine Number of stations Max. number of upper units 1) Max. number of lower units 1) Max. number of lateral units 1) Number of clamping fixtures Table indexing accuracy TIR Max. cycles Double cycle Multiple cycle Clamping devices Min. clamping diameter Max. clamping diameter Machining units Max. machining length Central cam for working feed (machining units) Linear cam for working feed (machining units) CN-control system for working feed Chuck indexing for workpiece machining around Rotation of workpiece (chuck drive), speed adjustable up to 6000 Machining spindles...

Mikron Machining Headquarter Mikron SA Agno Via Ginnasio 17 6982 Agno Switzerland Tel. +41 91 610 61 11 Fax +41 91 610 66 80 [email protected] Mikron GmbH Rottweil Berner Feld 71 D-78628 Rottweil Tel. +49 741 5380 0 Fax +49 741 5380 580 [email protected] Mikron Corp. Monroe 200 Main Street P.O. Box 268 Monroe, CT 06468 / USA Tel. +1 203 261 31 00 Fax +1 203 268 47 52 [email protected] www.youtube.com/mikrongroup www.mikron.com Mikron® is a trademark of Mikron Holding AG, Biel (Switzerland) Pictures and colours of the products here included are samples