OVERLOAD PROTECTION EQUIPMENT Torque Limiters / Two-shaft Butting Type ■ Specifications Misalignment Parallel [mm] • The set torque values in the table above are those when the rotation speed is 1500 min-1. • Set torque values vary by ± 20%. • If you need durability for the torque values in the area, select a larger size. Rotation speed

■ Standard Bore Diameter ø A Bore Drilling Standards Nominal bore diameter Standard bore diameter A [mm] 15 Motor standards Motor standards Motor standards Motor standards Motor standards • There is no keyway for bore diameter ø8 mm. ■ Standard Bore Diameter ø K Bore Drilling Standards Nominal bore diameter Standard bore diameter K [mm] 14 Motor standards Motor standards Motor standards Motor standards • There is no keyway for bore diameter ø8 mm. ■ Option Signal Pin Unattended or remotely controlled machines and equipment require equipment that detects an overload and automatically switches...

Unit [mm] Models compliant with the old JIS standard (class 2) JIS B 1301 1959 Nominal Bore diameter [øA/øK] bore diameter Tolerance H7 8 Models compliant with the new JIS standard (H9) JIS B 1301 1996 Keyway height Nominal Bore diameter [T] [øA/øK] bore diameter Tolerance H7 — Keyway width [W] Tolerance H9 Models compliant with the motor standard JIS C 4210 2001 Keyway height Nominal Bore diameter [T] [øA/øK] bore diameter Tolerance G7 — ■ NOTE • The set screws are included with the product. • For standard bore drilling dimensions other than those specified, please contact Miki Pulley. TT-2X-01-14N-19H-10NM-P...