STARFLEX ALS R-B-B – Datasheet CLAMP TYPE ■ Specifications Parallel [mm] Static torsional stiffness [N·m/rad] • Axial displacement is not allowed in the negative direction. • Higher rpm possible with balancing. • Stiffness values given are from measurements taken at 20 ℃. • The moment of inertia and mass are specified for the maximum bore diameter. • øDB = Interference radius of the screw head ■ Standard Bore Dimensions and Rated Transmission Torque Unit [mm] Modell Standard bore diameter d1, d2 [mm] and rated transmission torque [N·m] 3 • Bore diameters whose fields contain numbers are supported as the standard bore diameters. • Bore diameters whose fields contain numbers are restricted in their rated transmission torque by the holding power of the shaft connection component. The numbers indicate the rated transmission torque value [N·m]. ＋ 0.010 • The recommended processing tolerance for paired mounting shafts is the h7 class. However, for a shaft diameter of ø35, the tolerance is － 0.025. • Bore diameters between the minimum and maximums shown in the dimensions table are compatible, but bore diameters other than those shown in the above table require other arrangements. Contact Miki Pulley for details. Material: Aluminum Element type R: Hardness, 97; JIS A; Tight-fit type Bore diameter: d1 (Small diameter) ‒ d2 (Large diameter) Bore specifi

STARFLEX ALS Y-B-B – Datasheet CLAMP TYPE ■ Specifications Parallel [mm] Static torsional stiffness [N·m/rad] • Axial displacement is not allowed in the negative direction. • Higher rpm possible with balancing. • Stiffness values given are from measurements taken at 20 ℃. • The moment of inertia and mass are specified for the maximum bore diameter. • øDB = Interference radius of the screw head ■ Standard Bore Dimensions and Rated Transmission Torque Unit [mm] Modell Standard bore diameter d1, d2 [mm] and rated transmission torque [N·m] 3 • Bore diameters whose fields contain numbers are supported...

STARFLEX ALS B-B-B – Datasheet CLAMP TYPE ■ Specifications Misalignment Parallel [mm] Static torsional stiffness [N·m/rad] • Higher rpm possible with balancing. • Stiffness values given are from measurements taken at 20 ℃. • The moment of inertia and mass are specified for the maximum bore diameter. • øDB = Interference radius of the screw head ■ Standard Bore Dimensions and Rated Transmission Torque Unit [mm] Modell ALS-030-B Standard bore diameter d1, d2 [mm] and rated transmission torque [N·m] 6 • Bore diameters whose fields contain numbers are supported as the standard bore diameters. • Bore...