video corpo cad

SFC Model
12Pages

{{requestButtons}}

Catalog excerpts

SFC Model - 1

Metal Disc Couplings Single Element Type Specifications Type Torsional stiffness [N・m/rad] * Types A / B / C are automatically specified by Miki Pulley according to the combination of bore diameters you select, and cannot be specified by the customer. * Check the Standard Bore Diameter list as rated torque may be restricted by the holding power of the shaft connection component. * Max. rotation speed does not take into account dynamic balance. * Torsional stiffness values given are measured values for the element alone. * The moment of inertia and mass are measured for the maximum bore diameter. * Types A / B / C are automatically specified by Miki Pulley according to the combination of bore diameters you select, and cannot be specified by the customer. * The øDB value is measured assuming that the head of the clamping bolt is larger than the external diameter of the hub. * The K dimension is the inner diameter of the element. For d2 dimension exceeding this value, shaft can be inserted only up to LF dimension to the d2 side hub. * The nominal diamete

Open the catalog to page 1
SFC Model - 2

Standard Bore Diameter Standard (option) bore diameter, d1/d2 [mm] and restricted rated torque [N∙m] 3 Shaft tolerance Nominal bore diameter j6(Option) k6(Option) SFC-002SA2 SFC-005SA2 SFC-010SA2 SFC-020SA2 Supported bore diameter for each model ELECTROMAGNETIC CLUTCHES & BRAKES SPEED CHANGERS & REDUCERS INVERTERS LINEAR SHAFT DRIVES TORQUE LIMITERS ROSTA SERIES Metal Disc Couplings SERVOFLEX High-rigidity Couplings Metal Couplings * The shaft tolerance for standard bore diameter is h7 (h6 or g6): designation B. However, for a bore diameter of ø35, the shaft tolerance is 0.025 . * Shaft...

Open the catalog to page 2
SFC Model - 3

Metal Disc Couplings SFC(DA2) Types Double Element Type Specifications Type Torsional stiffness [N・m/rad] * Types A / B / C are automatically specified by Miki Pulley according to the combination of bore diameters you select, and cannot be specified by the customer. * Check the Standard Bore Diameters as rated torque may be restricted by the holding power of the shaft connection component. * Max. rotation speed does not take into account dynamic balance. * Torsional stiffness values given are measured values for the element alone. * The moment of inertia and mass are measured for the...

Open the catalog to page 3
SFC Model - 4

Standard Bore Diameter Standard (option) bore diameter, d1/d2 [mm] and restricted rated torque [N∙m] 3 Shaft tolerance Nominal bore diameter j6(Option) k6(Option) SFC-002DA2 SFC-005DA2 SFC-010DA2 SFC-020DA2 Supported bore diameter for each model ELECTROMAGNETIC CLUTCHES & BRAKES SPEED CHANGERS & REDUCERS INVERTERS LINEAR SHAFT DRIVES TORQUE LIMITERS ROSTA SERIES Metal Disc Couplings SERVOFLEX High-rigidity Couplings Metal Couplings * The shaft tolerance for standard bore diameter is h7 (h6 or g6): designation B. However, for a bore diameter of ø35, the shaft tolerance is 0.025 . * Shaft...

Open the catalog to page 4
SFC Model - 5

Metal Disc Couplings SFC(SA2) Types Single Element Type Options Tapered shaft supported Allows coupling via a clamping hub when a taper adapter is mounted on the tapered shaft of a servo motor. Specifications Model Torsional stiffness [Nm/rad] * Types B / C are automatically specified by Miki Pulley according to the bore diameter you select, and cannot be specified by the customer. * Check the Standard Bore Diameters as rated torque may be restricted by the holding power of the shaft connection component. * Max. rotation speed does not take into account dynamic balance. * Torsional...

Open the catalog to page 5
SFC Model - 6

SFC(DA2) Types Double Element Type Options Tapered shaft supported Allows coupling via a clamping hub when a taper adapter is mounted on the tapered shaft of a servo motor. CLUTCHES & BRAKES Torsional stiffness [N・m/rad] 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) TORQUE LIMITERS 1(On one side) 1(On one side) 1(On one side) SPEED CHANGERS & REDUCERS INVERTERS LINEAR SHAFT DRIVES * Types B / C are automatically specified by Miki Pulley according to the bore diameter you select, and cannot be specified by the customer. * Check the...

Open the catalog to page 6
SFC Model - 7

Metal Disc Couplings SFC Models Options For length-specified special order parts SFC(DA2) type spacer length can be changed to attain the necessary distance between shafts. Specify the length in 1 mm units. Specifications Misalignment 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) 1(On one side) * Types A / B / C are automatically specified by Miki Pulley according to the combination of bore diameters you select, and cannot be specified by the...

Open the catalog to page 7
SFC Model - 8

Options For keyway milling applications If you are using a keyed shaft, we can mill a keyway in the clamping hub to your specifications. Keyway milling standard CLUTCHES & BRAKES SPEED CHANGERS LINEAR SHAFT DRIVES TORQUE LIMITERS H9 keyway width standards Nominal bore dia. Bore dia. Keyway width Keyway height Shaft tolerance d1・d2 W1・W2 T1・T2 [mm] [mm] [mm] h7 j6 k6 Bore dia. Keyway width Keyway height Shaft tolerance d1・d2 W1・W2 T1・T2 [mm] [mm] [mm] h7 j6 k6 SERIES Metal Disc Couplings Metal Slit Couplings SERVOFLEX High-rigidity Couplings Metal Couplings Shaft diameter Bore dia. Keyway...

Open the catalog to page 8
SFC Model - 9

Metal Disc Couplings SFC Models Items Checked for Design Purposes ■ Spring Characteristics SFC(SA2) ■ Axial load and amount of displacement LoadN LoadN Displacementmm Displacementmm Displacementmm ■ Spring Characteristics SFC(DA2) ■ Axial load and amount of displacement LoadN LoadN ■ arallel misalignment direction P load and amount of displacement Displacementmm Displacementmm Displacementmm LoadN LoadN

Open the catalog to page 9
SFC Model - 10

043 ■ Special Items to Take Note of ■ Poor Mounting Examples You should note the following to prevent any problems. (1) Always be careful of parallel, angular, and axial misalignment. (2) Always tighten bolts with the specified torque. CLUTCHES & BRAKES Couplings are assembled at high accuracy using a special mounting jig to ensure accurate concentricity of left and right internal diameters. Take extra precautions when handling couplings, should strong shocks be given on couplings, it may affect mounting accuracy and cause the parts to break during use. C (1) ouplings are designed for use...

Open the catalog to page 10

All Miki Pulley Europe AG catalogs and technical brochures

  1. STK Catalog

    2 Pages

  2. ASK Model

    2 Pages

  3. SFM Model

    8 Pages

  4. SFS Model

    14 Pages

  5. SFF Model

    14 Pages

  6. SFH Model

    8 Pages

  7. DC Motors

    12 Pages

  8. KSK Model

    2 Pages

  9. BXR-LE Model

    2 Pages

  10. BXR Model

    4 Pages

  11. BXW Model

    4 Pages

  12. BXH Model

    4 Pages

  13. BXL Model

    4 Pages

  14. BXL-N Model

    2 Pages