MIKI PULLEY RESONANCE DAMPING COUPLINGS M Quantity - Tightening torque Nominal dia. [N-m] • The d3 dimension is the inner diameter of the element. For d2 dimension exceeding this value, shaft can be inserted only up to LF dimension to the d2 side hub. • The figures in parentheses ( ) for the SFR-010 are the values when d2 is 08 mm.

■ Standard Bore Dimensions Bore diameter d1 (Small diameter) Bore diameter d2 (Large diameter) ITI Supported shaft tolerance B : h7(h6,g6)Shaft (Option J : j6Shaft , K : k6Shaft) * For nominal bore diameter, select d1 (small diameter)-d2 (large diameter) in that order. * If d1=d2 (same diameters), select B, J, and K in that order. MIKI PULLEY EUROPE AG Rheinweg 5, CH-8200 Schaffhausen, Tel: +41 52 625 24 24 MIKI PULLEY • The shaft tolerance for standard bore diameter is h7 (h6 or g6): designation B. • Shaft tolerances j6/k6: designations J/K are optional, and are only supported for bore diameters...

MIKI PULLEY Options Tapered shaft supported ■ SpecificationsModel Shape type • The shaft tolerance for standard bore diameter is h7 (h6 or g6): designation B. • Shaft tolerances j6/k6: designations J/K are optional, and are only supported for bore diameters marked with O. • Bore diameters marked with • or numbers are supported as the standard bore diameters. Please contact Miki Pulley regarding special arrangements which may be possible for other bore diameters. • Bore diameters whose fields contain numbers are restricted in their rated torque by the holding power of the shaft connection component...

■ Keyway Standards til MIKI PULLEY • We can also handle standards not listed above. Please contact Miki Pulley. ■ Standard Bore Diameter Nominal bore diameter Standard (option) bore diameter, d1/d2 [mm] and related rated torque [N-m] • The shaft tolerance for standard bore diameter is h7 (h6 or g6): designation B. • Shaft tolerances j6/k6: designations J/K are optional, and are only supported for bore diameters marked with O. • Bore diameters marked with • or numbers are supported as the standard bore diameters. Please contact Miki Pulley regarding special arrangements which may be possible for...