Catalogs >
Miki Pulley Europe AG >
Baumannflex Models

Baumannflex Models
8Pages

Catalog excerpts

Metal Coil Spring Couplings Metal Coil Spring Couplings BAUMANNFLEX Max. nominal torque [N·m] Pilot bore/added work ranges [mm] Operating temperature [℃ ] Backlash Drive High flexibility High torque Stainless steel 220 φ3 ～ 35 BAUMANN MINI FLEX: -40 to 120, BAUMANNFLEX: -30 to 100 Insignificant Induction motor Vacuum equipment, medical equipment, printing machinery Metal Coil Spring Couplings with Excellent Flexibility These couplings connect hubs that mount on shafts to other hubs, separated by a metal coil spring. They achieve excellent flexibility, compact size, and high torq

Open the catalog to page 1

Spring Materials and Features Small-capacity type Stainless steel SPEED CHANGERS Ultra-flexible Spring steel Stainless steel Standard/Single-flange Type CLUTCHES & BRAKES Spring steel Standard/Coupling type Spring steel LINEAR SHAFT DRIVES TORQUE LIMITERS SERIES Metal Disc Couplings SERVOFLEX High-rigidity Couplings ■ Allows angular deflection up to 14° ■ Three-layer coil makes it compact with high torque Metal Couplings Main Features Metal Slit Couplings HELI-CAL Metal Coil Spring Couplings BAUMANNFLEX Pin Bushing Couplings PARAFLEX Link Couplings SCHMIDT Dual Rubber MM・MF Rubber and...

Open the catalog to page 2

Metal Coil Spring Couplings ZG Models Specications Torque Torsional stiffness [N·m/rad] * Max. rotation speed does not take into account dynamic balance. * The moment of inertia and mass are measured for the maximum bore diameter. Pilot bore * Pilot bores are to be drilled into the part. * Left and right tap positions may be shifted slightly. Standard Bore Diameter Model ZG-6 ZG-8 Standard bore diameter d1, d2 3 * Standard bore-drilled products do not have keyways. Keyways may be possible under some conditions. Contact Miki Pulley for details. Bore diameter: d1 (Small diameter) - d2 (Large...

Open the catalog to page 3

Specications Torque Torsional stiffness [N·m/rad] SPEED CHANGERS CLUTCHES & BRAKES INVERTERS LINEAR SHAFT DRIVES * Max. rotation speed does not take into account dynamic balance. * The moment of inertia and mass are measured for the maximum bore diameter. TORQUE LIMITERS ROSTA SERIES Metal Disc Couplings * Pilot bores are to be drilled into the part. * The left and right tap positions are not correlated as shown in the diagram. Metal Couplings SERVORIGID Metal Slit Couplings HELI-CAL Metal Coil Spring Couplings BAUMANNFLEX Pin Bushing Couplings Standard Bore Diameter Model LM-6 -1 Dual...

Open the catalog to page 4

Metal Coil Spring Couplings MM Models Speciﬁcations Torque Torsional stiffness [N·m/rad] Torsional stiffness [N·m/rad] * Max. rotation speed does not take into account dynamic balance. * The moment of inertia and mass are measured for the maximum bore diameter. Pilot bore * Pilot bores are to be drilled into the part. MM-16K-S 12H-14N Size Materials Blank: Carbon steel and spring steel 　 -S : Stainless steel Bore diameter: d1 (Small diameter) - d2 (Large diameter) Blank: Pilot bore Bore speciﬁcations Blank : Compliant with the old JIS standards (class 2) E9 H: Compliant with JIS standards...

Open the catalog to page 5

Speciﬁcations Torque Torsional stiffness [N·m/rad] SPEED CHANGERS CLUTCHES & BRAKES LINEAR SHAFT DRIVES * Max. rotation speed does not take into account dynamic balance. * The moment of inertia and mass are measured for the maximum bore diameter. TORQUE LIMITERS ROSTA Metal Disc SERVOFLEX High-rigidity Couplings Metal Couplings SERVORIGID Metal Slit Couplings HELI-CAL Metal Coil Spring Couplings BAUMANNFLEX Pin Bushing Couplings Link Couplings * Pilot bores are to be drilled into the part. Dual Rubber STEPFLEX Rubber and Plastic Couplings Pilot bore MIKI PULLEY STARFLEX Jaw Couplings...

Open the catalog to page 6

Metal Coil Spring Couplings Standard Hole-Drilling Standards M MM/MF Models Unit [mm] Models compliant with the old JIS standard (class 2) JIS B 1301 1959 Models compliant with the new JIS standard (H9) JIS B 1301 1996 Models compliant with the new JIS standard (JS9) JIS B 1301 1996 Models compliant with the motor standard JIS C 4210 2001 Bore Keyway Keyway diameter width height [d1・d2] [W1・W2] [T1・T2] Tolerance Tolerance H7 JS9 Nominal bore diameter Bore Keyway Keyway diameter width height [d1・d2] [W1・W2] [T1・T2] Nominal bore diameter Nominal bore diameter Nominal bore diameter Bore Keyway...

Open the catalog to page 7

ZG/LM/MM/MF Models Items Checked for Design Purposes ■ Special Items to Take Note of You should note the following to prevent any problems. (1) Find the torque, Ta, applied to the coupling using the output capacity, P, of the driver and the usage rotation speed, n. (1) Always be careful of parallel, angular, and axial misalignment. (2) Always tighten bolts with the specified torque. ■ Precautions for Handling (1) The operating temperature range is -40℃ to 120℃ for ZG and LM models and -30℃ to 100℃ for MM and MF models. Note that the MM(K) and MF(K) types are not waterproof and cannot be...

Open the catalog to page 8

Baumannflex Models 8Pages

Catalog excerpts

All Miki Pulley Europe AG catalogs and technical brochures

Baumannflex Models
8Pages