*mydirectindustry

Zeta

Product catalog summary

Overview: The Zeta 60-100 plasma cutters are portable, user-friendly, three-phase machines designed for workshop use and site repairs. They are suitable for cutting all conductive metals and metal alloys, using only compressed air as plasma gas.

Specifications: The Zeta 60 and Zeta 100 models operate on a 3x400 V mains voltage with a fuse requirement of 10 A and 20 A, respectively. They offer a current range of 20/88-60/104 A/V for Zeta 60 and 20/88-100/120 A/V for Zeta 100. The duty cycle at 100%/40°C is 40/96 A/V for Zeta 60 and 75/110 A/V for Zeta 100. Both models have an efficiency rate of 0.9 and 0.8, respectively, and an open circuit voltage of 241 V for Zeta 60 and 248 V for Zeta 100.

Cutting Capabilities: Zeta 60 can perform quality cuts up to 12 mm, while Zeta 100 can handle up to 25 mm. For dividing cuts with reduced quality, the thickness can increase by up to 50%. The machines are equipped for punched plate cutting and can be used for both manual and automated cutting processes.

Features: The plasma cutters feature a user-friendly control panel, power-saving standby functions, and automatic pilot arc ignition for extended torch life. Zeta 100 is also prepared for fine gouging to detect lack of fusion after welding.

Optional Equipment: Available options include a circle cutting device, roller guide, trolley for Zeta 100, and various nozzle sizes for high-quality cuts.

Dimensions and Weight: Zeta 60 measures 360x220x570 mm and weighs 27 kg. Zeta 100 measures 405x345x675 mm and weighs 36 kg (6 m hose) or 39 kg (15 m hose).

Compliance and Protection: Both models comply with EN/IEC60974-1 and EN/IEC60974-10 standards and have a protection class of IP 23.

Catalog excerpts

ZETA range THREE-PHASE PLASMA CUTTERS FOR EASE OF OPERATION AND OPTIMAL CUTTING ECONOMY Zeta 60-100 are portable and user-friendly three-phase plasma cutters in robust cabinets – designed for workshop use and site repairs. The machines are applicable for cutting in all conductive metals and metal alloys.

Open the catalog to page 1

Zeta 60-100 plasma cutters A user-friendly control panel makes it easy to control the plasma cutting process. Once you have set the process and amperage according to plate thickness, the machine is ready for cutting. The Zeta plasma cutters use only compressed air as plasma gas and can be connected to your compressed air plant. The machines can be used with a generator as power source and feature power-saving standby functions for optimal cutting and operating economy. The plasma arc is ignited automatically via the pilot arc; this means longer service life of wear parts in the torch body. Automated...

Open the catalog to page 2

All Migatronic Welding Equipment LTD. catalogs and technical brochures

Archived catalogs

Robot Integrator
8 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list