Intrinsically Safe ultrasonic sensor with ANZEx, ATEX, C-UL-US, & IECEx approvals for use in Explosive Atmospheres / Hazardous Locations. Features • Intrinsically Safe "ia" • Various Sensing Ranges • Temperature Compensation • Wide Temperature Range • LED Indicator • Analog Voltage Output • PPS or PVC Enclosure • Sync/Tx Input Line The RPS-409A-IS2 is an intrinsically safe analog ultrasonic sensor available in a variety of ranges. The RPS-409A-IS2 has ANZEx, ATEX, & IECEx approval for use in mines susceptible to firedamp (Group 1 protection level Ma), explosive gas atmospheres (Group 2 protection level Ga Zones 0, 1, & 2), and explosive dust atmospheres (Group 3 protection level Da Zones 20, 21, & 22). The RPS-409A-IS2 also has CUL-US approval for use in Class I, II, and III Division 1 hazardous locations. The sensor comes in a 30mm enclosure, and is powered by 16 - 30 V dc with reverse polarity protection. The RPS-409A-IS2 has a short circuit protected analog voltage output. The analog voltage is a fixed volts per inch based on the 0.75V @ 6" maximum range of the sensor. For example when using the RPS-409A-80-IS2, the output is a linear 0.125 V per inch. A target placed 6 inches from the sensor will result in an output of 0.75 V or a target placed at 80 inches from the sensor will result in an output of 10 V. The RPS-409A-IS2 has built-in temperature compensation to provide accurate readings throughout the entire operating temperature range. An LED indicator is provided. The LED is green with no target detected and changes to red when a target is detected. The sensor is completely sealed and the connection must be made with a cable having a rating of IP67 or greater. In addition to the analog voltage output line the sensor also has a Sync/Tx line. This line can be used for connecting multiple sensors together (Sync) to prevent cross talk, or to control when the sensor transmits (Tx). The RPS-409A-IS2 is designed to take advantage of today's PLC and computer analog input cards. The numerical values that are programmed into the PLC or computer will determine the zero and span of the sensor.

Model Number Contact Migatron for other sensor ranges. Entity Parameters: Power Input: Input Current: 16 - 30VDC Reverse Polarity Protected (A minimum of 24VDC must be applied to the safety barrier) 24mA maximum with 24VDC applied to the safety barrier Echo loss: Analog Voltage Output (Load 100k Ohms to infinity) Short Circuit Protected 10.5 - 11.5V Sensor Range Enclosure Material: Enclosure Rating: Polyphenylene Sulfide (PPS) Enclosure with PPS and PTFE sensing face, or Polyvinyl Chloride (PVC) Enclosure with PVC sensing face IP67 (Mating cable must be rated IP67 or higher.) M12 A-coded 4-Pin...

Specifications (continued): Sensor & Accessories: Approvals: Australia & New Zealand: ANZEx 13.3010X Ex ia I Ma Ex ia IIC T4 Ga Ex ia IIIC T101°C Da -40°C ≤ Ta ≤ +60°C Canada & USA: C-UL-US; UL File # E226209 Temperature Code T4 Class I, Division 1, Groups A, B, C, & D, Class II, Division 1, Groups E, F, & G, and Class III, Division 1 Europe (CENELEC): DEMKO 12 ATEX 1103028X I M1 / II 1 GD Ex ia I/IIC T4 Ma/Ga Ex ia IIIC T101°C Da International (IECEx): IECEx UL 12.0001X Ex ia I/IIC T4 Ma/Ga Ex ia IIIC T101°C Da -40°C ≤ Ta ≤ +60°C Mounting Consideration The performance of this sensor can be influenced...

Ordering Information: PART NUMBER * Contact Migatron for other sensor ranges. -J|C ffligolron Corp. v—III ((»—' Phone: (815) 338-5800 935 Dieckman St., Woodstock, IL 60098, USA web: www.migatron.com / e-mail: [email protected]