Website:
Midwest Pressure Systems
Catalog excerpts
Model Number R03S 3.5 Gallon ASME Steel Receiver Tank 2:1 Maximum Pressure Boost Supply Pressure of 15 to 150 psig Self-Relieving Maximum Discharge Pressure Regulator Discharge Pressure of 15 to 230 psig Temperature Range of 40-130 ℉ 100% Duty Cycle Approximate Weight of 45 Pounds MODEL R03S FEATURES A. Inlet pressure gauge B. Built-in pressure regulator C. Discharge pressure gauge D. 1/2" FNPT inlet filter E. Exhaust silencer F. 235 psig ASME safety relief valve G. 3.5 gallon, 350 psig ASME tank H. 1/2" FNPT discharge port I. 1/4" FNPT condensate drain valve J. Four 1/2" diameter mounting holes Midwest Pressure Systems, Inc. 850 Transport Drive, Valparaiso, IN 46383 Phone 219-462-0070 M I D W E S T 2" Square PRESSURE SY S T E M S www.midwestpressuresystems.co
Open the catalog to page 1
Model R03S Flowrate vs Supply and Discharge Pressure 240 Maximum Allowable Pressure of 230 psig Discharge Pressure in psig 100 psig supply 180 80 psig supply air 150 Use the curves to the left to determine the Model R03S air pressure booster maximum discharge flowrate for a given set of operating conditions. In the example shown above, a maximum discharge pressure of 110 psig is desired and 80 psi supply air is available. Follow the 110 psi line until it intersects with the 80 psi supply air curve. Draw a vertical line from the intersection down to the bottom line to determine the maximum...
Open the catalog to page 2
