MCB MidacoFan for CNC Chip & Coolant Cleaning Clean off chips and coolant INSIDE the machining center automatically and change parts OUTSIDE the VMC WHILE it’s cutting. The MCB MidacoFan is the perfect complimentary tool for all CNC users, both big and small, short run or production. Engineered to provide the best results possible when it comes to removing machined chips and coolant from your workpiece or fixture. An innovative and affordable automatic cleaning solution for all your enclosed CNC machining centers. Automated Cleaning Installed into your tool holder and mounted in the machine spindle, the MidacoFan uses your machine’s control to clean “unattended” between machining cycles. Through Coolant Through coolant ready to clean workpiece prior to fan use. Midaco Corporation

MCB MidacoFan Available in two (2) sizes, the MCB MidacoFan can be operated within the recommended RPM range in all ENCLOSED CNC machining centers. Steel Shank Easy Part Replacement The mounting cylindrical shank, manufactured with a weldon flat, is made out of U.S. 4140 steel and is 0.75” (19.05mm) dia. Can be mounted into your collet chuck or endmill holder. Designed with an easy disassembly feature allowing quick replacement of the fan blades, springs and hub as needed. Replacement blades (available in single-blade and 4-blade kits) come with spring holding pins and positioning pins preassembled....