MRPC MIDACO Manual Rotary Pallet Changer For 4-Axis, 5-Axis, Vertical and Turning Applications NO AIR OR HYDRAULICS REQUIRED MANUAL PALLET CHANGERS are being used by both large manufacturers and small job shops to increase productivity and profits. This low cost system easily adapts to any VMC, HMC, 4-axis, 5-axis, rotary table, lathe, turning center, CMM and EDM machines. Midaco Corporation • www.midaco-corp.com • ph: (847) 593-8420

Manual Rotary Pallet Changer i Manual Rotary Pallet Changer i Standard MRPC Includes: 2 each-CastAluminum Pallet Tops 8.5“ x1”dia. (216mm x 25.4mm dia.) Height of system with pallet in locked position 3.31” (84.12 mm) LOAD/UNLOAD OFFLINE - Change parts, set-up, clean chips and inspect offline while alternate pallet is in machine. JOBS EASILY INTERRUPTED - Quickly change pallets to run an “EMERGENCY” job with no teardown costs. INCREASE PRODUCTIVITY - Doubles, even triples spindle uptime. Improves machine output. ELIMINATE DOWNTIME - First article inspection done offline while alternate job is...