Manual Pallet System MIDACOCORPORATION Compact shuttle with telescoping legs, adapts to all machines including those with chip/coolant drawers Load, unload, inspect parts and set up jobs while alternate pallet is in machine Minimize set up time on repeat jobs by dedicating tooling onto pallets Pallets easily interchanged between machines or departments Heavy/large workpieces easily loaded outside the machine Up to 2000+ lbs. (909 kgs.) capacity Linear guide rails for ease of use Increase machine and operator productivity Air blast at each contact pad for chip removal Palletized jobs easily interrupted for emergency or J.l.T. job Exchange pallet in seconds with +/- .0001" (.0025mm) repeatability

Easy flip handle precisely locks pallet into cast iron receiver. For productivity on all types of machining centers, MIDACO's Micro Pallet System™ allows operators to manually change pallets in seconds. The low profile receiver does not require air supply making it versatile for horizontal, vertical and special application machines. Retention Stud Assembly Each Standard Micro Pallet System (model MPS 31) Includes: Material: Cast Iron Aluminum Retention Stud Assembly - 8 standard PNEUMATIC LIFT-OFF Pallet guide rails on the front of the receiver allow safe and easy loading of pallets in only seconds....

"SIDE BY SIDE" SHUTTLE PALLET SYSTEM MIDACO's front load "Side by Side" Shuttle Pallet System comes with one cast iron, pneumatically powered receiver, two cast aiuminum pallets and one "Side by Side" Shuttie aliowing an operator to switch pallets in seconds. The operator simply activates the pneumatic receiver to unclamp the pallet. The completed pallet (A) can be rolled out of the machine to the shuttle. The next pallet (B) can be quickly rolled into the machine and clamped in only seconds. (C) Precision ground linear guide rails provide smooth and easy transfer of pallets. (D) Adjustable legs...

CUSTOMER SATISFACTION "Since I've added 5 MIDACOpallet changers, I've increased my productivity OVER 600%." "100% plus increase in productivity without suffering quality." "Productivity has increased over 90% and downtime due to loading and unloading parts was greatly reduced." "25% savings in job set up time, eliminating lifting of heavy devices such as vises and rotary heads." "We have achieved a 2 hour savings in production during an 8 hour shift, a 25% increase in productivity." "I've been in the industry for over 25 years and have seen a lot ofdifferent machines and pallet changers. MIDACO's...