Automatic Single/Dual Pallet Changer One shuttle on each side of the machine - One pallet per shuttle. For VMCs and Bridge Mills which do not move in Y-Axis. A120SD S/D series shown on machine tool No overhead obstruction for large-part crane loading Left Side Mount Optional Light Curtain Guarding Meets CE Compliance Right Side Mount Keep the spindle on your large VMC or Bridge Mill turning by loading/unloading heavy workpieces OUTSIDE the machine tool while it’s cutting. Once a cycle is complete, the servo driven shuttles mounted on each end of the machine automatically transfer the part loaded pallets onto a receiver mounted directly to the machine table. Save valuable machining time and increase productivity. Midaco Corporation

Automatic Single/Dual Pallet Changer Easily load and unload parts onto pallets with a crane without any overhead obstruction. System includes two (2) end load shuttles (one on each side of the machine, with one (1) pallet on each shuttle. Cast iron pneumatic receiver(s), with hardened and ground locating pins, mount directly onto the machining center table. A160SD S/D series shown with 160” x 63” (4064mm x 1600mm) cast aluminum pallet and CE Light Curtain guarding. Once a job cycle is complete, the shuttle’s servo drive automatically transfers the pallet from the other end of the machine onto...